|
RS7206 Datasheet, PDF (1/16 Pages) Orister Corporation – 300mA CMOS LDO Linear Regulator with Enable | |||
|
RS7206
300mA CMOS LDO Linear Regulator with Enable
Page No. : 1/16
General Description
The RS7206 is a 4âLow (Lowâdropout, Lowâquiescent Current, Lowânoise, Lowâcost) linear regulator with ON/OFF control.
The device operates in the input voltage range from +2.2V to +7.0V and delivers 300mA output current.
The highâaccuracy output voltage is preset at an internally trimmed voltage 1.2V, 1.5V, 1.8V, 2.5V, 2.8V, 3.0V or 3.3V. Other
output voltages can be maskâoptioned from 1.2V to 5.0V with 100mV increment.
The RS7206 consists of a 1.0V reference compare amplifier, a Pâchannel pass transistor, and an enable/disable logic circuit.
Other features include shortâcircuit protection, and thermal shutdown protection.
The RS7206 is also compatible with low ESR ceramic capacitors which give added output stability. This stability can be
maintained even during load fluctuations due to the excellent transient response of the chip. The RS7206 devices are
available in SOTâ25 and VSONâ6 (2x2) packages.
Features
â Operating Voltage Rangeï¼+2.2V to +7.0V
â Output Voltagesï¼+1.2V to +5.0V with 100mV
â Dropout Voltageï¼160mV@150mA
â Low Current Consumption 15μA (Typ.)
â Shutdown Currentï¼0.1μA (Typ.)
â ±2% Output Voltage Accuracy (special ±1% highly
accurate)
â Low ESR Capacitor Compatible
â High Ripple Rejectionï¼70dB
â Output Current Limit Protection (450mA)
â Short Circuit Protection (150mA)
â Thermal Overload Shutdown Protection
â Control Output ON/OFF Function
â SOTâ25 and VSONâ6 (2x2) Packages
â RoHS Compliant and 100% Lead (Pb)âFree and Green
(Halogen Free with Commercial Standard)
Applications
â Batteryâpowered equipment
â Voltage regulator for microprocessor
â Voltage regulator for LAN cards
â Wireless Communication equipment
â Audio/Video equipment
â Post Regulator for Switching Power
â Home Electric/Electronic Appliance
â CDMA/GSM Cellular Handsets
â Laptop, Palmtops, Notebook Computers
â Portable Information Application
Application Circuits
This integrated circuit can be damaged by ESD. Orister Corporation recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
DSâRS7206â15 October, 2009
www.Orister.com
|
▷ |