C-51505NFJ-SLW-AC Datasheet, PDF (15/18 Pages) OPTREX CORPORATION – LCD Module Technical Specification

No.
Parameter
9
Chipped Glass
D = ( Long + Short ) / 2 * : Disregard Units : mm
Criteria
(1) Other than electrode pad areas and corner areas
Y
Z
t
X
“A” size:0.82or more
X
Y
Z
*
≤0.4
*
≤2.5
≤0.7
=t
≤3.5
≤1.0
≤1/2t
≤5.5
≤1.5
≤1/3t
(2) Corner Areas
1.Lead Areas
X
Y
“A” size:Less than 0.82
X
Y
Z
*
≤0.3
*
≤2.0
≤0.5
=t
≤3.0
≤0.5
≤1/2t
≤4.5
≤1.2
≤1/3t
“A” size
“A” size
0.82or more Less than 0.82
X+Y
X+Y
≤4.0
≤3.0
2.Other than electrode pad Areas
X
Y
“A” size
“A” size
0.82or more Less than 0.82
X+Y
X+Y
≤3.0
≤2.0
The total number of chipped glass defects shall be up to 5 spots.
The chipped glass shall be judged only from the size of the defect.
If the chipped area touches the seal line, the LCD is not acceptable.
C-51505NFJ-SLW-AC (AC) No. 2002-0177
OPTREX CORPORATION
Page 15/18