TRSL-33120WG Datasheet, PDF (2/5 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 155 Mbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER

Optoway
2
TRSL-33120WG
************************************************************************************************************************************************************************
Transmitter Specifications (0^oC < Topr < 70^oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Po
λ
∆λ
SMSR
0
1480
---
30
---
1550
---
5
1580
1
dBm
1
nm
nm -20 dB Width
dB
Extinction Ratio
Output Eye
E_R
10
---
---
dB
Compliant with Bellcore GR-253-CORE and ITU recommendation G.957
Optical Rise Time
t_r
Optical Fall Time
t_f
Relative Intensity Noise
RIN
2
ns
10% to 90% Values
2
ns
10% to 90% Values
-116
dB/Hz
Total Jitter
TJ
1
ns
2
Electrical
Data Input Current – Low
I_IL
-350
Data Input Current – High
I_IH
350
Differential Input Voltage
Data Input Voltage – Low
V_IH - V_IL
300
V_IL - V_CC
-2.0
-1.58
Data Input Voltage -- High
V_IH - V_CC
-1.1
-0.74
Disable Input Voltage -- Low
V_TDIS,L
0
0.5
Disable Input Voltage -- High
V_TDIS,H
Vcc – 1.3
Vcc
Shut Off Time for TxDis
t_DIS
1
Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber.
2. Measured with a 2²³-1 PRBS with 72 ones and 72 zeros.
3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
µA
µA
mV
V
3
V
3
V
TX Output Enabled
V
TX Ouput Disabled
ms
Receiver Specifications (0^oC < Topr < 70^oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Optical
Sensitivity
---
---
---
-34
dBm
Maximum Input Power
Pin
-3
---
dBm
Signal Detect -- Asserted
Pa
---
---
-34
dBm
Signal Detect -- Deasserted
Pd
-47
---
---
dBm
Signal detect -- Hysteresis
1.0
---
dB
Wavelength of Operation
1100
---
1600
nm
Electrical
Data Output Voltage – Low
Data Output Voltage – High
V_OL - V_CC
-2.0
V_OH - V_CC
-1.1
-1.58
V
-0.74
V
Signal Detect Output Voltage -- Low
V_OL
0.5
V
Signal Detect Output Voltage -- High
V_OH
2.0
V
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 2²³-1 PRBS with 72 ones and 72 zeros.
2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.
Notes
1
Transition: low to high
Transition: high to low
2
2
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V2.0