TRS-3030G Datasheet, PDF (2/5 Pages) Optoway Technology Inc – 5V / 1310 nm / 155 Mbps RoHS Compliant Optical Single-Mode Transceiver

Optoway
2
TRS-3030G
***********************************************************************************************************************************************************************
Transmitter Specifications (0^oC < Topr < 70^oC, 4.75V < Vcc < 5.25V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Po
-15
---
-8
dBm
1
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Output Eye
λ
1261
1310
1360
nm
∆λ
---
---
7.7
nm
RMS (σ)
E_R
8.2
---
---
dB
Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957
Optical Rise Time
t_r
Optical Fall Time
t_f
Relative Intensity Noise
RIN
2
ns
10% to 90% Values
2
ns
10% to 90% Values
-116
dB/Hz
Total Jitter
TJ
1
ns
2
Electrical
Data Input Current – Low
Data Input Current – High
I_IL
-350
I_IH
µA
350
µA
Differential Input Voltage
Data Input Voltage – Low
V_IH - V_IL
300
V_IL - V_CC
-2.0
mV
-1.58
V
3
Data Input Voltage -- High
V_IH - V_CC
-1.1
-0.74
V
3
Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber.
2. Measured with a 2²³-1 PRBS with 72 ones and 72 zeros.
3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
Receiver Specifications (0^oC < Topr < 70^oC, 4.75 V < Vcc < 5.25V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity
---
---
---
-34
dBm
1
Maximum Input Power
Pin
-3
---
dBm
Signal Detect -- Asserted
Pa
---
---
-34
dBm Transition: low to high
Signal Detect -- Deasserted
Pd
-47
---
---
dBm Transition: high to low
Signal detect -- Hysteresis
1.0
---
4.0
dB
Wavelength of Operation
1100
---
1600
nm
Electrical
Data Output Voltage – Low
Data Output Voltage – High
V_OL - V_CC
-2.0
V_OH - V_CC
-1.1
-1.58
V
2
-0.74
V
2
Signal Detect Output Voltage -- Low V_OL - V_CC
-2.0
-1.58
V
Signal Detect Output Voltage -- High V_OH - V_CC
-1.1
-0.74
V
Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 2²³-1 PRBS with 72 ones and 72 zeros.
2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2005 V2.0