SPS-7110VW-1RG_15 Datasheet, PDF (2/5 Pages) Optoway Technology Inc – 1.5 Gb/s Single Optical SM Digital Diagnostic Receiver

Optoway
2
SPS-7110VW-1RG
***********************************************************************************************************************************************************************
ABSOLUTE MAXIMUM RATINGS
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Tc
0
70
o_C
Power Supply Voltage
Vcc
0
4
V
ESD Tolerance on all pins
1
KV HBM
Notes
Relative Humidity
---
5
95
% RH non-condensing
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Power Supply Voltage
Vcc
3.13
3.3
3.47
Operating Case Temperature
Tc
0
70
Baud Rate
50
1485
1500
Power Supply Current
Icc
120
160
Units / Notes
V
o_C
Mb/s
mA
Receiver Specifications (0^oC < Tc < 70^oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Optical
Wavelength of Operation
1260
---
Sensitivity for SMPTE 292M
1.485 Gb/s
0
---
Sen
0
Signal Detect -- Asserted
Pa
---
---
Signal Detect -- Deasserted
Pd
-31
---
Signal detect -- Hysteresis
1
Optical Return Loss
-27
Electrical
CML Output (Differential)
550
660
Optical Rise Time / Fall Time
tr / tf
Output LOS Voltage -- Low
Output LOS Voltage -- High
SCL, SDA
1. 20% to 80%, unfiltered.
V_OL
0
V_OH
2.5
V_OH
2.5
V_OL
0
Max
1620
-18
-20
-21
---
6
850
270
800
1.5
0.5
Vcc+0.3
Vcc+0.3
0.5
Units
Notes
nm
dBm
Pathological
dBm
PRBS 2²³-1, BER=1E-12
dBm Transition: low to high
dBm Transition: high to low
dB
dB
mVp-p
ps
ps
ns
V
V
V
V
AC coupled output
1, SMPTE 292M
1, SMPTE 344M
1, SMPTE 259M
IOL=-1.6mA, 1 TTL unit load
IOH=40µA, 1 TTL unit load
MODULE DEFINITION
Module Definition
PIN 5
PIN 6
Interpretation by Host
4
SCL
SDA
Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SCL and SDA appear as no connector
(NC). When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E²PROM
protocol of the ATMEL AT24C01A/02/04 family of components.
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2008 V1.0