SPS-53160WG_15 Datasheet, PDF (2/5 Pages) Optoway Technology Inc – 622 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Optoway
2
SPS-53160WG
***********************************************************************************************************************************************************************
Transmitter Specifications (0^oC < Topr < 70^oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Po
1
---
5
dBm
1
Output Center Wavelength
λ
1500
1550
1580
nm
Output Spectrum Width
∆λ
---
---
1
nm -20 dB Width
Side Mode Suppression Ratio
SMSR
30
dB
Extinction Ratio
E_R
10
---
---
dB
Output Eye
Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957
Optical Rise Time
t_r
1.2
ns
10 % to 90% Values
Optical Fall Time
t_f
1.2
ns
10 % to 90% Values
Relative Intensity Noise
RIN
-120
dB/Hz
Electrical
Data Input Current – Low
Data Input Current – High
I_IL
-350
I_IH
µA
350
µA
Differential Input Voltage
V_IH - V_IL
0.5
TX Disable Input Voltage – Low
T_{DIS, L}
0
TX Disable Input Voltage – High
T_{DIS, H}
2.0
2.4
V
Peak-to-Peak
0.5
V
2
Vcc
V
2
TX Disable Assert Time
TX Disable Deassert Time
T_ASSERT
T_DEASSERT
1
ms
50
µs
TX Fault Output Voltage -- Low
T_FaultL
0
0.5
V
3
TX Fault Output Voltage -- High
T_FaultH
2.0
Vcc+0.3
V
3
1. Output power is power coupled into a 9/125 µm single mode fiber.
2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Receiver Specifications (0^oC < Topr < 70^oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Optical
Sensitivity
Sens
-37
Maximum Input Power
Pin
-9
Signal Detect -- Asserted
Pa
---
-37
Signal Detect -- Deasserted
Pd
-47
---
---
Signal detect -- Hysteresis
1.0
---
Wavelength of Operation
1100
---
1600
Electrical
Differential Output Voltage
V_OH – V_OL
0.6
Output LOS Voltage -- Low
V_OL
0
Output LOS Voltage -- High
V_OH
2.0
4. Measured at 2²³-1 PRBS at BER 1E-10.
2.0
0.5
Vcc+0.3
5. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Units
Notes
dBm
4
dBm
4
dBm Transition: low to high
dBm Transition: high to low
dB
nm
V
V
5
V
5
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2008 V3.0