SPS-33100WG Datasheet, PDF (2/4 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 155 Mbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Optoway
SPS-33100WG
***********************************************************************************************************************************************************************
Transmitter Specifications (0^oC < Topr < 70^oC, 3.1V < Vcc < 3.5V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
Po
λ
∆λ
SMSR
-3
---
2
dBm
1
1480
1580
nm
---
---
1
nm -20 dB Width
30
dB
Extinction Ratio
Output Eye
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
E_R
10
---
---
dB
Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957
t_r
2
ns
10 % to 90% Values
t_f
2
ns
10 % to 90% Values
RIN
-120
dB/Hz
Electrical
Data Input Current – Low
I_IL
-350
Data Input Current – High
I_IH
350
Differential Input Voltage
V_IH - V_IL
0.5
2.4
TX Disable Input Voltage – Low
T_{DIS, L}
0
0.5
TX Disable Input Voltage – High
T_{DIS, H}
2.0
Vcc
TX Disable Assert Time
T_ASSERT
10
TX Disable Deassert Time
T_DEASSERT
1
TX Fault Output Voltage -- Low
T_FaultL
0
0.8
TX Fault Output Voltage -- High
T_FaultH
2.0
Vcc+0.3
1. Output power is power coupled into a 9/125 µm single mode fiber.
2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
µA
µA
V
Peak-to-Peak
V
2
V
2
µs
ms
V
3
V
3
Receiver Specifications (0^oC < Topr < 70^oC, 3.1V < Vcc < 3.5V)
Parameter
Symbol
Min
Typ
Max
Optical
Sensitivity
Sens
-34
Maximum Input Power
Pin
-8
Signal Detect -- Asserted
Pa
---
-34
Signal Detect -- Deasserted
Pd
-47
---
---
Signal detect -- Hysteresis
1.0
---
Wavelength of Operation
1200
---
1600
Electrical
Differential Output Voltage
V_OH – V_OL
0.6
Output LOS Voltage -- Low
V_OL
0
Output LOS Voltage -- High
V_OH
2.0
4. Measured at 2²³-1 PRBS at BER 1E-10.
2.0
0.8
Vcc+0.3
5. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
Units
Notes
dBm
4
dBm
4
dBm Transition: low to high
dBm Transition: high to low
dB
nm
V
V
5
V
5
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw
12/1/2005 V2.0