SPB-9905WG Datasheet, PDF (2/5 Pages) Optoway Technology Inc – 1490 nm TX / 1310 nm RX , 3.3V / 2.5 Gbps Digital Diagnostic Single-Fiber SFP Transceiver

Optoway
2
SPB-9905WG
**********************************************************************************************************************************************************************
Absolute Maximum Ratings
Parameter
Symbol
Min
Storage Temperature
Tstg
-40
Operating Case Temperature
Topr
0
-10
Max
85
70
85
Units
o_C
o_C
Notes
SPB-9905WG
SPB-9905BWG
Relative Humidity
RH
0
85
%
Non condensing
Power Supply Voltage
Vcc
0
3.6
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.13
Power Supply Current
I_{CC (TX+RX)}
Operating Case Temperature
Topr
0
-10
Data Rate
622
Typ
3.3
200
2488
Max
3.47
300
70
85
2670
Units / Notes
V
mA
o_{C / SPB-9905WG}
o_{C / SPB-9905BWG}
Mb/s
Transmitter Specifications (0^oC < Topr < 70^oC, 3.13V < Vcc < 3.47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Po
-10
-3
dBm
1
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio
λ
σ_λ
SMSR
1480
30
1500
1
nm
nm -20 dB width
dB
Extinction Ratio
Output Eye
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
E_R
8.2
dB
Compliant with Telecordia GR-253-GORE and ITU-T Recommendation G.957
t_r
150
ps
20 % to 80% Values
t_f
150
ps
20 % to 80% Values
RIN
-120
dB/Hz
Electrical
Data Input Current – Low
Data Input Current – High
I_IL
-350
I_IH
Differential Input Voltage
V_IH - V_IL
0.5
TX Disable Input Voltage – Low
T_{DIS, L}
0
TX Disable Input Voltage – High
T_{DIS, H}
2.0
TX Disable Assert Time
T_ASSERT
TX Disable Deassert Time
T_DEASSERT
TX Fault Output Voltage -- Low
T_FaultL
0
TX Fault Output Voltage -- High
T_FaultH
2.0
350
2.4
0.5
Vcc
10
1
0.5
Vcc+0.3
µA
µA
V
Peak-to-Peak
V
2
V
2
µs
ms
V
3
V
3
Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber.
2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX.
3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 3/1/2006 V2.0