PDA-1300 Datasheet, PDF (2/2 Pages) Optoway Technology Inc – InGaAs PIN Photodiode Module for CATV Receiver

Optoway
PDA-1300
****************************************************************************************************************************************************************
PRECAUTIONS for USE
ESD protection is imperative. Use of grounding straps, anti-static mats, and other ESD protective
equipment is recommended when handling or testing an InGaAs PIN or any other junction photodiodes.
Fiber pigtails should be handled with less than 10N pull and with a bending radius greater than 30 mm.
MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT
Note: 1. Specifications subject to change without notice.
2. Other PIN assignment is available upon request.
ORDER INFORMATION
Part No.: P D A − 1 3 0
□ □−□□□
Code
0
1
Fiber Buffer
900 µm
250 µm
Code PIN Assignment
Blank
Standard
A to Z
others
Code Flange
V Vertical
H Horizontal
X No Flange
Code
X
SA
FA
Connector Type
No Connector
SC/APC
FC/APC
****************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 8/1/2006 V2.0