XPS-2380WG_09 Datasheet, PDF (1/9 Pages) Optoway Technology Inc – 10Gbps / 80km / 1550 nm XFP Single-Mode Optical Transceiver for 10GbE / 10G FC

Optoway
1
XPS-2380WG
***********************************************************************************************************************************************************************
XPS-2380WG / XPS-2380BWG / XPS-2380AWG
(RoHS Compliant)
10Gbps / 80km / 1550 nm XFP Single-Mode Optical Transceiver for 10GbE / 10G FC
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Support 9.95 Gbps to 10.5 Gbps
XPS-2380WG series transceiver is designed for
l Complaint with XFP MSA
single-mode fibre serial optical data communications such as
l Compliant with XFI 10G Serial Electrical Interface
l Maximum Link Length of 80 km
l Temperature-stabilized 1550 nm EML Transmitter
l High Sensitivity APD Receiver
l 2-Wire Interface for Integrated Digital Diagnostic
10G Ethernet 10GBASE-ER/EW and 10G Fibre Channel.
The transceiver consists of two sections: The transmitter
section consists of a temperature-stabilized 1550 nm
electrical-modulated laser (EML), driver and signal
conditioner. The receiver section incorporates an Avalanche
Monitoring
l No reference Clock required
l Power Dissipation < 3.5 W
l +3.3V and + 5V Power Supply
l RoHS-6 Compliant
l -5 to 70^oC Operating: XPS-2380WG
l -5 to 85^oC Operating: XPS-2380BWG
l -40 to 85^oC Operating: XPS-2380AWG
photodiode (APD) integrated with a trans-impedance
preamplifier (TIA) and signal conditioner.
The module is with the XFP 30-pin connector to allow
hot plug capability. Integrated Tx and Rx signal conditioners
provide high jitter-tolerance for full XFI compliance and no
external reference clock required. The internally ac coupled
high speed serial I/O simplifies interfacing to external
circuitry. +5V and +3.3V power supplies are needed. The
optical output can be disabled by LVTTL logic high-level
APPLICATIONS
input of TX_DIS. Loss of signal (RX_LOS) output is
l 10GBASE-ZR/ZW
l 80 km 10G Fibre Channel
provided to indicate the loss of an input optical signal of
receiver.
A serial EEPROM in the transceiver allows the user to
LASER SAFETY
This single-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
access transceiver digital diagnostic monitoring and
configuration data via the 2-wire XFP Management
Interface. This interface uses a single address, A0h, with a
memory map divided into a lower and upper area. Basic
digital diagnostic data is held in the lower area while specific
data is held in a series of tables in the high memory area.
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
XPS-2380WG
XPS-2380BWG
XPS-2380AWG
9.95 – 10.5
9.95 – 10.5
9.95 – 10.5
10GBASE
ZR/ZW
ZR/ZW
ZR/ZW
Distance
(km)
80
80
80
Wavelength
(nm)
1550 EML
1550 EML
1550 EML
Package
XFP with DMI
XFP with DMI
XFP with DMI
Case Temp
(^oC)
-5 to 70
-5 to 85
-40 to 85
RoHS
Compliant
Yes
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Storage Temperature
Tstg
-40
Operating Case Temperature
Topr
-5
-5
-40
Relative Humidity
RH
0
Power Supply Voltage (5V)
Vcc5
-0.5
Power Supply Voltage (3.3V)
V_CC3
-0.5
Receiver Input Optical Power
Mip
Max
Units
Notes
85
o_C
70
o_C
XPS-2380WG
85
XPS-2380BWG
85
XPS-2380AWG
85
%
Non condensing
6.0
V
3.6
V
-4
dBm
Received average power
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 7/1/2009 V2.0