XPS-2371W-CXX0G Datasheet, PDF (1/9 Pages) Optoway Technology Inc – 10Gbps / 70 km / CWDM XFP Single-Mode Optical Transceiver for OC-192 / 10GbE / 10G FC

Optoway
1
XPS-2371W-CXX0G
***********************************************************************************************************************************************************************
XPS-2371W-CXX0G
(RoHS Compliant)
10Gbps / 70 km / CWDM XFP Single-Mode Optical Transceiver for OC-192 / 10GbE / 10G FC
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Support 9.95 Gbps to 10.5 Gbps CWDM-LH Application
l Uo to 70 km Link Distance
l Complaint with XFP MSA
l Compliant with XFI 10G Serial Electrical Interface
l Temperature-stabilized 8-Wavelength CWDM EML
XPS-2371W-CXXG series CWDM transceiver is
designed for single-mode fibre serial optical data
communications such as OC-192 / SDH STM-64 and 10G
Ethernet 10GBASE-ER/EW.
This module is designed for single mode fiber and
Transmitter: from 1470 nm to 1610 nm
l 2-Wire Interface for Integrated Digital Diagnostic
operates at a nominal wavelength of CWDM wavelength.
There are eight center wavelengths available from 1470 nm
Monitoring
l XFI Loopback Mode
l No reference Clock required
l Power Dissipation < 3.5 W
l +3.3V and +5 V Power Supply
l RoHS-6 Compliant
l 0 to 70^oC Case Operating Temperature
to 1610 nm, with each step 20 nm. The transmitter section
consists of a temperature-stabilized CWDM
electrical-modulated laser (EML), driver and signal
conditioner. The receiver section incorporates a PIN
photodiode integrated with a trans-impedance preamplifier
(TIA) and signal conditioner.
The module is with the XFP 30-pin connector to allow
APPLICATIONS
hot plug capability. Integrated Tx and Rx signal conditioners
provide high jitter-tolerance for full XFI compliance and no
l SONET OC-192 / SDH STM-64
l 10GBASE-ZR/ZW 10G Ethernet
external reference clock required. The internally ac coupled
high speed serial I/O simplifies interfacing to external
circuitry. Dual 5V and 3.3V power supply is needed. The
LASER SAFETY
This single-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
optical output can be disabled by LVTTL logic high-level
input of TX_DIS. Loss of signal (RX_LOS) output is
provided to indicate the loss of an input optical signal of
receiver.
A serial EEPROM in the transceiver allows the user to
access transceiver digital diagnostic monitoring and
configuration data via the 2-wire XFP Management
Interface. This interface uses a single address, A0h, with a
memory map divided into a lower and upper area. Basic
digital diagnostic data is held in the lower area while specific
data is held in a series of tables in the high memory area.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
10G
Distance Wavelength
(km)
(nm)
Package
XPS-2371W-CXXG 9.95 – 10.5
ZR / ZW
70
CWDM* Wavelength (-5 to 70^oC)
CWDM* XFP with DMI
Central
Min.
Wavelength (nm)
Typ.
(nm)
Max.
(nm)
Label
Central Min.
Wavelength (nm)
Typ.
(nm)
-C470
1464.5
1470
1477.5
C47
-C490
1484.5
1490
1497.5
C49
-C510
1504.5
1510
1517.5
C51
-C530
1524.5
1530
1537.5
C53
-C550
1544.5
1550
-C570
1564.5
1570
-C590
1584.5
1590
-C610
1604.5
1610
CWDM*: 8 Wavelengths from 1470 nm to 1610 nm, each step 20 nm.
Case Temp
(^oC)
-5 to 70
Max.
(nm)
1557.5
1577.5
1597.5
1617.5
RoHS
Compliant
Yes
Label
C55
C57
C59
C61
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 2009/7/1 V1.0