English
Language : 

XPS-2140WG Datasheet, PDF (1/9 Pages) Optoway Technology Inc – 10Gb/s 40km 1310 nm XFP Single-Mode Optical Transceiver for 10GbE / 10GFC
Optoway
1
XPS-2140WG
***********************************************************************************************************************************************************************
XPS-2140WG / XPS-2140BWG / XPS-2140AWG
(RoHS Compliant)
10Gb/s 40km 1310 nm XFP Single-Mode Optical Transceiver for 10GbE / 10GFC
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
z Support 9.95 Gbps to 10.5 Gbps
z Complaint with XFP MSA
z Compliant to IEEE 802.3ae 10GBASE-ER/EW
z Compliant to 10GFC 1200-SM-LL-L
z Compliant with XFI 10G Serial Electrical Interface
z Maximum Link Length of 40 km
z Uncooled 1310 nm DFB LD
z 2-Wire Interface for Integrated Digital Diagnostic
XPS-2140WG series transceiver is designed for
single-mode fibre serial optical data communications such as
10G Ethernet 10GBASE-ER/EW and 10G Fibre Channel
1200-SM-LL-L. This module is operated at a nominal
wavelength of 1310 nm. A guaranteed minimum optical link
budget of 17 dB is offered which can correspond to a link
distance of 40 km (assuming worst case fiber loss of 0.35
dB/km).
Monitoring
z XFI Loopback Mode
z No reference Clock required
z Only Required +3.3 V Power Supply
z Power Consumption < 2 W
z RoHS Compliant
z -5 to 70oC Operating: XPS-2140WG
z -10 to 85oC Operating: XPS-2140BWG
z -40 to 85oC Operating: XPS-2140AWG
z Duplex LC Connector
The transceiver consists of two sections: The transmitter
section consists of a directly modulated uncooled 1310 nm
DFB laser, driver and signal conditioner. The receiver
section incorporates a PIN photodiode integrated with a
trans-impedance preamplifier (TIA) and signal conditioner.
The module is with the XFP 30-pin connector to allow
hot plug capability. Integrated Tx and Rx signal conditioners
provide high jitter-tolerance for full XFI compliance and no
external reference clock required. The internally ac coupled
high speed serial I/O simplifies interfacing to external
circuitry. Only single 3.3V power supply is needed. The
APPLICATIONS
z 10GBASE-ER at 10.3125 Gb/s
z 10GBASE-EW at 9.953 Gb/s
z 10GFC at 10.51875 Gb/s
optical output can be disabled by LVTTL logic high-level
input of TX_DIS. Loss of signal (RX_LOS) output is
provided to indicate the loss of an input optical signal of
receiver.
A serial EEPROM in the transceiver allows the user to
LASER SAFETY
This single-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
access transceiver digital diagnostic monitoring and
configuration data via the 2-wire XFP Management
Interface. This interface uses a single address, A0h, with a
memory map divided into a lower and upper area. Basic
digital diagnostic data is held in the lower area while specific
data is held in a series of tables in the high memory area.
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
XPS-2140WG
XPS-2140BWG
XPS-2140AWG
9.95 – 10.52
9.95 – 10.52
9.95 – 10.52
10GBASE
LR/LW
LR/LW
LR/LW
Distance
(km)
40
40
40
Wavelength
(nm)
1310 DFB
1310 DFB
1310 DFB
Package
XFP with DMI
XFP with DMI
XFP with DMI
Case Temp
(oC)
-5 to 70
-10 to 85
-40 to 85
RoHS
Compliant
Yes
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Storage Temperature
Tstg
-40
Operating Case Temperature
Topr
-5
-10
-40
Relative Humidity
RH
0
Power Supply Voltage
VCC3
0
Max
Units
Notes
85
oC
70
oC
XPS-2140WG
85
XPS-2140BWG
85
XPS-2140AWG
85
%
Non condensing
3.6
V
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 2007/12/1 V2.0