TRSL-9380G_11 Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 2.5 Gbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-9380G
***********************************************************************************************************************************************************************
TRSL-9380G / TRSL-9380AG
3.3V / 1550 nm / 2.5 Gbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-48 LR-2 / SDH STM-16 (L-16.2)
The TRSL-9380G series single mode transceivers is small
form factor, low power, high performance module for
Compliant
l Fiber Channel 2X/1X SM-LC-L FC-PI Compliant
l IEEE 802.3z Gigabit Ethernet Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1550 nm DFB LD Transmitter
l APD High Sensitivity Receiver
l 26 dB Link Budget at Least
l Link Distance 80 km at Least
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating : TRSL-9380G
l -20 to 85^oC Operating : TRSL-9380AG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
bi-directional serial optical data communications such as
SONET OC-48 / SDH STM-16, gigabit Ethernet and Fiber
channel. This module is designed for single mode fiber and
operates at a nominal wavelength of 1550 nm. A guaranteed
minimum optical link budget of 26 dB is offered which can
correspond to a link distance of over 80 km (assuming worst
case fiber loss of 0.25 dB/km). The transmitter section
uses a multiple quantum well 1550 nm DFB laser and is a
class 1 laser compliant according to International Safety
Standard IEC-60825. The receiver section uses an
integrated InGaAs Avalanche photodetector preamplifier
mounted in an optical header and a limiting post-amplifier
IC. A PECL logic interface simplifies interface to external
circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
APPLICATIONS
l Switch to Switch Interface
l OC-48 ATM Links
l High Speed Interface for File Servers
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
SONET
/SDH
TRSL-9380G
2488 LR-2/L-16.2
TRSL-9380AG
2488 LR-2/L-16.2
Distance
(km)
80
80
Wavelength
(nm)
1550 DFB
1550 DFB
Package
2X5 LC
2X5 LC
Temp. TX Power
(^oC)
(dBm)
0 to 70 3 to -2
-20 to 85 3 to -2
RX Sens.
(dBm)
-28
-28
RoHS
Compliant
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Temperature
Topr
0
70
o_C
TRSL-9380G
Soldering Temperature
-20
85
TRSL-9380AG
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Vcc
0
4.5
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units
Power Supply Voltage
Operating Temperature
Vcc
3.13
3.3
3.47
V
Topr
0
70
o_{C / TRSL-9380G}
-20
85
o_{C / TRSL-9380AG}
Data Rate
622
2488
2700
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2011 V3.0