TRSL-9380FW Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 2.125 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER

Optoway
TRSL-9380FW
*****************************************************************************************************************************************************************************
TRSL-9380FW
3.3V / 1550 nm / 2.125 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER
****************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l Compliant with Fiber Channel 2X/1X SM-LC-L FC-PI
l Compliant with IEEE 802.3z Gigabit Ethernet
l Multi-sourced 2X10 SFF Package Style
l 1550 nm DFB LD Transmitter
l 23 dB Link Power Budget At Least
l Transmission Distance up to 40 km
l Analog Monitor Function
The TRSL-9350FW series single mode transceivers is
small form factor, low power, high performance module for
bi-directional serial optical data communications such as
Fiber Channel 2X/1X SM-LC-L FC-PI and IEEE 802.3z
Gigabit Ethernet 1000BASE. This module is designed for
single mode fiber and operates at a nominal wavelength of
1550 nm. A guaranteed minimum optical link budget of 23
dB is offered which can correspond to a link distance of
-- Transmitter Laser Bias Current
over 80 km (assuming worst case fiber loss of 0.25 dB/km).
-- Transmitter Laser Optical Power Monitor
The transmitter section uses a multiple quantum well
-- Receiver Photo Detector Current
l AC/AC Coupled Signal Input / Output
l LVPECL Signal Input / Output
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70^oC Operation
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
1550 nm DFB laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
LASER SAFETY
Compliant
This single mode transceiver is a Class 1 laser product. It
APPLICATIONS
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
l ATM Switches and Routers
l SONET / SDH Switch Infrastructure
l XDSL Applications
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug
ORDER INFORMATION
P/No.
Bit Rate
FC
(Mb/s)
Distance Wavelength Package
(km)
(nm)
TRSL-9380FW 2125/1063 200/100
80 1550 DFB 2X10 LC
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Storage Temperature
Tstg
-40
85
Operating Temperature
Soldering Temperature
Topr
0
70
---
260
Power Supply Voltage
Vcc
-0.5
3.6
Input Voltage
---
-0.5
Vcc
Output Current
Iout
0
50
Temp.
(^oC)
0 to 70
TX Power RX Sens.
(dBm) (dBm)
5 to 0
-23
Signal
Detect
Output
Units
o_C
o_C
o_C
V
V
mA
Notes
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Power Supply Current
Icc
Min
3.135
0
1000
Typ
3.3
2125
200
Max
3.465
70
300
Units / Notes
V
o_{C / with air flow 1m/sec}
Mb/s
mA
****************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 6/30/2004 V1.1