TRSL-9380FG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 2.125 Gbps SFF LC SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-9380FG
***********************************************************************************************************************************************************************
TRSL-9380FG
3.3V / 1550 nm / 2.125 Gbps SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l Fibre Channel 2X / 1X SM-LC-L FC-PI Compliant
l IEEE 802.3z Gigabit Ethernet 1000BASE-ZX
The TRSL-9380FG series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1550 nm DFB LD Transmitter
l 23 dB Link Power Budget at Least
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70^oC Operation
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Fibre Channel 2X/1X SM-LC-L FC-PI and IEEE 802.3z
Gigabit Ethernet 1000BASE-LX. This module is designed
for single mode fiber and operates at a nominal wavelength
of 1550 nm. A guaranteed minimum optical link budget of
23 dB is offered which can correspond to a link distance of
over 80 km (assuming worst case fiber loss of 0.25 dB/km).
The transmitter section uses a multiple quantum well
1550 nm DFB laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a
Compliant
limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
APPLICATIONS
l ATM Switches and Routers
l SONET / SDH Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate FC-PI
(Gb/s)
TRSL-9380FG
2.125/1.063 200/100
Distance Wavelengt Package
(km)
h (nm)
80
1550 DFB 2X5 LC
Temp.
(^oC)
0 to 70
TX Power RX Sens. RoHS
(dBm) (dBm) Compliant
5 to 0
-23
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Power Supply Current
Icc
Min
-40
0
0
GND
0
Min
3.13
0
1063
Max
85
70
260
4.5
Vcc
30
Typ
3.3
2125
200
Units
o_C
o_C
o_C
V
V
mA
Notes
Air flow 1m/sec
10 seconds on leads only
Max
3.47
70
300
Units / Notes
V
o_{C / air flow 1m/sec}
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V2.0