TRSL-9380 Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 2.5 Gbps SFF LC SINGLE-MODE TRANSCEIVER

Optoway
TRSL-9380
*****************************************************************************************************************************************************************************
TRSL-9380
3.3V / 1550 nm / 2.5 Gbps SFF LC SINGLE-MODE TRANSCEIVER
****************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-48 LR-2 / SDH STM-16 (L-16.2)
The TRSL-9380 series single mode transceivers is small
form factor, low power, high performance module for
Compliant
l Fiber Channel 2X/1X SM-LC-L FC-PI Compliant
l IEEE 802.3z Gigabit Ethernet Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1550 nm DFB LD Transmitter
l APD High Sensitivity Receiver
l 26 dB Link Budget at Least
l Link Distance 80 km at Least
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70^oC Operating
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
bi-directional serial optical data communications such as
SONET OC-48 / SDH STM-16, gigabit Ethernet and Fiber
channel. This module is designed for single mode fiber and
operates at a nominal wavelength of 1550 nm. A guaranteed
minimum optical link budget of 26 dB is offered which can
correspond to a link distance of over 80 km (assuming worst
case fiber loss of 0.25 dB/km). The transmitter section
uses a multiple quantum well 1550 nm DFB laser and is a
class 1 laser compliant according to International Safety
Standard IEC-60825. The receiver section uses an
integrated InGaAs Avalanche photodetector preamplifier
mounted in an optical header and a limiting post-amplifier
IC. A PECL logic interface simplifies interface to external
circuitry.
LASER SAFETY
APPLICATIONS
l Switch to Switch Interface
l OC-48 ATM Links
l High Speed Interface for File Servers
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET
(Mb/s) /SDH
TRSL-9380
2488
LR-2
Distance Wavelength Package
(km)
(nm)
80
1550 DFB 2X5 LC
Temp. TX Power RX Sens.
(^oC)
(dBm) (dBm)
0 to 70 3 to -2
-28
Signal
Detect
LVTTL
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
0
GND
0
Max
85
70
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
With air flow 1m/sec
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Min
3.135
0
622
Typ
3.3
2488
Max
3.465
70
2700
Units
V
o_{C / air flow 1m/sec}
Mb/s
****************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 7/1/2004 V1.0