TRSL-9140G_11 Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 2.5 Gbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-9140G
***********************************************************************************************************************************************************************
TRSL-9140G / TRSL-9140AG
3.3V / 1310 nm / 2.5 Gbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-48 LR-1 / SDH STM-16 (L-16.1)
The TRSL-9140G series single mode transceivers is small
form factor, low power, high performance module for
Compliant
l Fibre Channel 2X/1X SM-LC-L FC-PI Compliant
l IEEE 802.3z Gigabit Ethernet Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1310 nm DFB LD Transmitter
l APD High Sensitivity Receiver
l 26 dB Link Budget at Least
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating : TRSL-9140G
l -20 to 85^oC Operating : TRSL-9140AG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
bi-directional serial optical data communications such as
SONET OC-48 / SDH STM-16, gigabit Ethernet and Fiber
channel. This module is designed for single mode fiber and
operates at a nominal wavelength of 1310 nm. A guaranteed
minimum optical link budget of 26 dB is offered which can
correspond to a link distance of over 40 km (assuming worst
case fiber loss of 0.45 dB/km). The transmitter section
uses a multiple quantum well 1310 nm DFB laser and is a
class 1 laser compliant according to International Safety
Standard IEC-60825. The receiver section uses an
integrated InGaAs Avalanche photodetector preamplifier
mounted in an optical header and a limiting post-amplifier
IC. A PECL logic interface simplifies interface to external
circuitry.
LASER SAFETY
Compliant
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
APPLICATIONS
l Switch to Switch Interface
l OC-48 ATM Links
l High Speed Interface for File Servers
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Mb/s)
SONET
/SDH
TRSL-9140G
2488 LR-1/L-16.1
TRSL-9140AG
2488 LR-1/L-16.1
Distance
(km)
40
40
Wavelength
(nm)
1310 DFB
1310 DFB
Package
2X5 LC
2X5 LC
Temp. TX Power
(^oC)
(dBm)
0 to 70 3 to -2
-20 to 85 3 to -2
RX Sens.
(dBm)
-28
-28
RoHS
Compliant
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Operating Temperature
Tstg
-40
85
o_C
Topr
0
70
o_C
TRSL-9140G
-20
85
TRSL-9140AG
air flow 1m/sec
Soldering Temperature
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Vcc
0
4.5
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units
Power Supply Voltage
Operating Temperature
Vcc
3.13
3.3
3.47
V
Topr
0
-20
70
o_{C / TRSL-9140G}
85
o_{C / TRSL-9140AG}
air flow 1m/sec
Data Rate
622
2488
2700
Mb/s
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2011 V3.0