TRSL-9115G_11 Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 2.5 Gbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-9115G
***********************************************************************************************************************************************************************
TRSL-9115G / TRSL-9115AG
3.3V / 1310 nm / 2.5 Gbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER
*********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-48 IR-1 / SDH STM-16 (S-16.1) Compliant
l Fiber Channel 2X/1X SM-LC-L FC-PI Compliant
l IEEE 802.3z Gigabit Ethernet Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1310 nm DFB LD Transmitter
l 13 dB Link Budget at Least
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating: TRSL-9115G
l -20 to 85^oC Operating: TRSL-9115AG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
The TRSL-9115G series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-48 IR-1 / SDH STM-16 (S-16.1), gigabit
Ethernet and 1X/2X Fiber channel. This module is designed
for single mode fiber and operates at a nominal wavelength
of 1310 nm. The transmitter section uses a multiple
quantum well 1310 nm DFB laser and is a class 1 laser
compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
Compliant
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
APPLICATIONS
l ATM Switches and Routers
l SONET / SDH Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET
(Mb/s)
/SDH
TRSL-9115G
2488 IR-1/S-16.1
TRSL-9115AG
2488 IR-1/S-16.1
Distance
(km)
15
15
Wavelength
(nm)
1310 DFB
1310 DFB
Package
2X5 LC
2X5 LC
Temp. TX Power
(^oC)
(dBm)
0 to 70 0 to -5
-20 to 85 0 to -5
RX Sens.
(dBm)
-18
-18
RoHS
Compliant
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Operating Temperature
Tstg
-40
85
o_C
Topr
0
70
o_C
TRSL-9115G
Soldering Temperature
-20
85
TRSL-9115AG
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Vcc
0
4.5
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Operating Temperature
Vcc
3.13
3.3
3.47
V
Topr
0
70
o_{C / TRSL-9115G}
-20
85
o_{C / TRSL-9115AG}
Data Rate
622
2488
2700
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2011 V3.0