TRSL-9110FW Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 2.125 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER

Optoway
TRSL-9110FW / TRSL-9110FAW
*****************************************************************************************************************************************************************************
TRSL-9110FW / TRSL-9110FAW
3.3V / 1310 nm / 2.125 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER
****************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l Compliant with Fiber Channel 2X/1X SM-LC-L FC-PI
l Compliant with IEEE 802.3z Gigabit Ethernet
l Multi-sourced 2X10 SFF Package Style
l 11.5 dB Link Power Budget At Least
l Analog Monitor Function
The TRSL-9110FW series single mode transceivers is
small form factor, low power, high performance module for
bi-directional serial optical data communications such as
IEEE 802.3z Gigabit Ethernet and 1X/2X Fiber channel.
This module is designed for single mode fiber and operates
at a nominal wavelength of 1310 nm. The transmitter
-- Transmitter Laser Bias Current
section uses a multiple quantum well laser and is a class 1
-- Transmitter Laser Optical Power Monitor
laser compliant according to International Safety Standard
-- Receiver Photo Detector Current
IEC-60825. The receiver section uses an integrated InGaAs
l AC/AC Coupled Signal Input / Output
l LVPECL Signal Input / Output
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70^oC Operation (TRSL-9110FW)
l -40 to 85^oC Operation (TRSL-9110FAW)
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
APPLICATIONS
of the module shall be terminated with an optical connector
or with a dust plug
l ATM Switches and Routers
l SONET / SDH Switch Infrastructure
l XDSL Applications
ORDER INFORMATION
P/No.
Bit Rate
FC
(Mb/s)
Distance Wavelength Package
(km)
(nm)
TRSL-9110FW 2125/1063 200/100
10
TRSL-9110FAW 2125/1063 200/100
10
1310
1310
2X10 LC
2X10 LC
Temp. TX Power RX Sens.
(^oC)
(dBm) (dBm)
0 to 70 -3 to -9.5 -21
-40 to 85 -3 to -9.5 -21
Signal
Detect
Output
LVTTL
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Symbol
Min
Max
Units
Notes
Tstg
-40
85
o_C
Topr
0
70
o_C
TRSL-9110FW
-40
85
TRSL-9110FAW
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Vcc
-0.5
3.6
V
Input Voltage
---
-0.5
Vcc
V
Output Current
Iout
0
50
mA
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Power Supply Current
Icc
Min
3.135
0
-40
1000
Typ
3.3
2125
200
Max
3.465
70
85
250
Units / Notes
V
o_{C / TRSL-9110FW}
o_{C / TRSL-9110FAW}
Mb/s
mA
****************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2004 V1.0