TRSL-8380G Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 4.25 Gbps SFF LC SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-8380G
***********************************************************************************************************************************************************************
TRSL-8380G
(RoHS Compliant)
3.3V / 1550 nm / 4.25 Gbps SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 4.25 Gb/s Bi-directional Data Links
The TRSL-8380G series single mode transceivers is small
l Duplex LC Single Mode Transceiver
form factor, low power, high performance module for
l Fibre Channel FC-PI 400/200/100-SM-LC-L Compliant
l IEEE 802.3z 1000BASE-LX Compliant
bi-directional serial optical data communications such as
4x/2x/1x Fibre Channel and 1000BASE-LX Gigabit
l Small Form Factor, RJ-45 size, 2×5 pin Package
Ethernet. This module is designed for single mode fiber and
l 1550 nm DFB LD Transmitter
l High Sensitivity APD Receiver
operates at a nominal wavelength of 1550 nm. The
transmitter section uses a multiple quantum well 1550 nm
l Up to 80km at 4.25Gb/s
DFB laser and is a class 1 laser compliant according to
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detect Output
l Single +3.3 V Power Supply
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC. A LVPECL logic interface simplifies
l RoHS Compliant
l 0 to 70^oC Operation
l Wave Solderable and Aqueous Washable
interface to external circuitry.
LASER SAFETY
l Class 1 Laser International Safety Standard IEC-60825
This single mode transceiver is a Class 1 laser product. It
Compliant
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
APPLICATIONS
l Tri-rate 1.063/2.125/4.25 Gb/s Fibre Channel
l 1.25 Gb/s 1000 BASE-LX Gigabit Ethernet
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
FC-PI
TRSL-8380G
4 / 2 / 1 400/200/100
Distance
(km)
80
Wavelengt
h (nm)
Package
1550 DFB 2×5 LC
Temp. TX Power RX Sens. RoHS
(^oC) (dBm) (dBm) Compliant
0 to 70 4 to 0
-26
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
0
GND
0
Max
85
70
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Operating Temperature
Vcc
3.13
3.3
3.47
V
Topr
0
70
o_{C / air flow 1m/sec}
Data Rate
1
4.25
Gb/s
Power Supply Current
Icc
200
300
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 2/1/2007 V1.0