TRSL-8340WG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 4.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-8340WG
***********************************************************************************************************************************************************************
TRSL-8340WG
(RoHS Compliant)
3.3V / 1550 nm / 4.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 4.25 Gbps Bi-directional Data Links
l Duplex LC Single Mode Transceiver
l Fibre Channel FC-PI 400/200/100-SM-LC-L Compliant
l IEEE 802.3z 1000BASE-LX Compliant
l Small Form-Factor, RJ-45 size, 2×7 pin Package
l SFF-8472 Digital Diagnostic Function
l 1550 nm DFB LD Transmitter
l 18 dB Power Budget at Least
l AC/AC Coupling according to MSA
l Up to 40 km Transmission
l LVTTL Transmitter Disable Input
l LVTTL Signal Detect Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating
l Class 1 Laser International Safety Standard IEC-60825
The TRSL-8340WG series single mode transceiver is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
4x/2x/1x Fibre Channel and 1000BASE-LX Ethernet. This
2×7 pin SFF transceiver comply with the 2×5 standard
package defined by the SFF MSA with the exception of four
extra pins for real-time digital diagnostics and transmitter
fault indication. Digital diagnostic functions are available
via the 2-wire serial interface defined in the SFF-8472 MSA.
This module is designed for single mode fiber and operates
at a nominal wavelength of 1550 nm. The transmitter
section uses a 1550 nm multiple quantum well DFB laser
and is a class 1 laser compliant according to International
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC.
Compliant
APPLICATIONS
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
l Tri-rate 1.063/2.125/4.25 Gb/s Fibre Channel
l 1.25 Gb/s 1000 BASE-LX Ethernet
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
FC-PI
Distance Wavelength
(km)
(nm)
Package
Temp. TX Power RX Sens. RoHS
(^oC )
(dBm)
(dBm) Compliant
TRSL-8340WG 4 / 2 / 1 400/200/100
40
1550 DFB 2×7 LC with DMI 0 to 70 4 to 0
-18
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Case Temperature
Topr
Power Supply Current
Data Rate
I_{CC (TX+RX)}
Min
-40
0
-0.5
GND
0
Min
3.13
0
1.0625
Max
85
70
260
3.6
Vcc
30
Typ
3.3
200
Units
o_C
o_C
o_C
V
V
mA
Notes
10 seconds on leads only
Max
3.47
70
280
4.25
Units / Notes
V
o_C
mA
Gb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 3/5/2007 V1.0