TRSL-8120WG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 4.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-8120WG
***********************************************************************************************************************************************************************
TRSL-8120WG / TRSL-8120BWG
(RoHS Compliant)
3.3V / 1310 nm / 4.25 Gbps Digital Diagnostic LC SFP SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 4.25 Gbps Bi-directional Data Links
l Duplex LC Single Mode Transceiver
l Fibre Channel FC-PI 400/200/100-SM-LC-L Compliant
l IEEE 802.3z 1000BASE-LX Compliant
l Small Form-Factor, RJ-45 size, 2×7 pin Package
The TRSL-8120WG series single mode transceiver is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
4x/2x/1x Fibre Channel and 1000BASE-LX Ethernet. This
2×7 pin SFF transceiver comply with the 2×5 standard
l SFF-8472 Digital Diagnostic Function
l 1310 nm DFB LD Transmitter
l AC/AC Coupling according to MSA
l Up to 20 km at 4.25 Gb/s
l LVTTL Transmitter Disable Input
package defined by the SFF MSA with the exception of four
extra pins for real-time digital diagnostics and transmitter
fault indication. Digital diagnostic functions are available
via the 2-wire serial interface defined in the SFF-8472 MSA.
This module is designed for single mode fiber and operates
l LVTTL Signal Detect Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating : TRSL-8120WG
l -10 to 85^oC Operating : TRSL-8120BWG
l Class 1 Laser International Safety Standard IEC-60825
at a nominal wavelength of 1310 nm. The transmitter
section uses a 1310 nm multiple quantum well DFB laser
and is a class 1 laser compliant according to International
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC.
Compliant
LASER SAFETY
APPLICATIONS
This single mode transceiver is a Class 1 laser product. It
l Tri-rate 1.063/2.125/4.25 Gb/s Fibre Channel
l 1.25 Gb/s 1000 BASE-LX Ethernet
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
FC-PI
TRSL-8120WG 4 / 2 / 1 400/200/100
TRSL-8120BWG 4 / 2 / 1 400/200/100
Distance
(km)
20
20
Wavelength
(nm)
Package
1310 DFB 2×7 LC with DMI
1310 DFB 2×7 LC with DMI
Temp.
(^oC )
0 to 70
-10 to 85
TX Power
(dBm)
0 to -5
0 to -5
RX Sens.
(dBm)
-18
-18
RoHS
Compliant
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
-10
70
85
o_C
TRSL-8120WG
TRSL-8120BWG
Power Supply Voltage
Vcc
-0.5
3.6
V
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Power Supply Voltage
Vcc
3.13
3.3
Operating Case Temperature
Topr
0
-10
Power Supply Current
Data Rate
I_{CC (TX+RX)}
200
1.0625
Max
3.47
70
85
250
4.25
Units / Notes
V
o_{C / TRSL-8120WG}
o_{C / TRSL-8120BWG}
mA
Gb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 2/1/2007 V1.0