TRSL-8110G Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 4.25 Gbps SFF LC SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-8110G
***********************************************************************************************************************************************************************
TRSL-8110G / TRSL-8110BG / TRSL-8110AG
(RoHS Compliant)
3.3V / 1310 nm / 4.25 Gbps SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 4.25 Gb/s Bi-directional Data Links
l Duplex LC Single Mode Transceiver
l Fibre Channel FC-PI 400/200/100-SM-LC-L Compliant
l IEEE 802.3z 1000BASE-LX Compliant
The TRSL-8110G series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
4x/2x/1x Fibre Channel and 1000BASE-LX Gigabit
l Small Form Factor, RJ-45 size, 2×5 pin Package
Ethernet. This module is designed for single mode fiber and
l 1310 nm DFB LD Transmitter
l Up to 10km at 4.25Gb/s
operates at a nominal wavelength of 1310 nm. The
transmitter section uses a multiple quantum well DFB
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detect Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation: TRSL-8110G
l -10 to 85^oC Operation: TRSL-8110BG
l -40 to 85^oC Operation: TRSL-8110AG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
laser and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC. A LVPECL logic interface simplifies
interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
Compliant
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
APPLICATIONS
l Tri-rate 1.063/2.125/4.25 Gb/s Fibre Channel
l 1.25 Gb/s 1000 BASE-LX Gigabit Ethernet
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
FC-PI
TRSL-8110G
4 / 2 / 1 400/200/100
TRSL-8110BG
4 / 2 / 1 400/200/100
TRSL-8110AG
4 / 2 / 1 400/200/100
Distance
(km)
10
10
10
Wavelengt
h (nm)
1310 DFB
1310 DFB
1310 DFB
Package
2×5 LC
2×5 LC
2×5 LC
Temp. TX Power
(^oC) (dBm)
0 to 70 -3 to -8
-10 to 85 -3 to -8
-40 to 85 -3 to -8
RX Sens. RoHS
(dBm) Compliant
-18
Yes
-18
Yes
-18
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
-10
-40
0
GND
0
Max
85
70
85
85
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
TRSL-8110G
TRSL-8110BG
TRSL-8110AG
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Operating Temperature
Vcc
3.13
3.3
3.47
V
0
Topr
-10
-40
70
85
85
o_{C / TRSL-8110G}
o_{C / TRSL-8110BG}
o_{C / TRSL-8110AG}
air flow 1m/sec
Data Rate
1
4.25
Gb/s
Power Supply Current
Icc
200
250
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 2/1/2007 V1.0