TRSL-7380CG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 1.25 Gbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-7380CG
***********************************************************************************************************************************************************************
TRSL-7380CG / TRSL-7380G / TRSL-7380ACG / TRSL-7380AG
3.3V / 1550 nm / 1.25 Gbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
The TRSL-7380CG series single mode transceivers is small
l IEEE 802.3z 1000BASE-ZX Compliant
form factor, low power, high performance module for
l Fiber Channel 1X SM-LC-L FC-PI Compliant
bi-directional serial optical data communications such as
l Small Form Factor, RJ-45 size, 2X5 pin Package
IEEE 802.3z Gigabit Ethernet 1000BASE-ZX and Fiber
l 1550 nm DFB LD Transmitter
Channel 1X SM-LC-L FC-PI. This module is designed for
l 24 dB Power Budget at Least
single mode fiber and operates at a nominal wavelength of
l AC/AC Coupled Signal Input / Output
1550 nm. A guaranteed minimum optical link budget of 24
l LVTTL Transmitter Disable Input
dB is offered which can correspond to a link distance of
l LVTTL Signal Detect Output :TRSL-7380CG
over 80 km (assuming worst case fiber loss of 0.25 dB/km).
l LVPECL Signal Detect Output :TRSL-7380G
The transmitter section uses a multiple quantum well
l Single +3.3 V Power Supply
DFB laser and is a class 1 laser compliant according to
l 0 to 70^oC Operating : TRSL-7380CG
International Safety Standard IEC-60825. The receiver
l -20 to 85^oC Operating : TRSL-7380ACG
section uses an integrated InGaAs detector preamplifier
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
(IDP) mounted in an optical header and a limiting
post-amplifier IC. A LVPECL logic interface simplifies
Compliant
interface to external circuitry.
APPLICATIONS
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
l Metro Edge Switching
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate 1000
(Gb/s) BASE
TRSL-7380CG
1.25/1.063 ZX
TRSL-7380ACG
1.25/1.063 ZX
Distance
(km)
80
80
Wavelengt
h (nm)
1550 DFB
1550 DFB
Package
2X5 LC
2X5 LC
Temp.
(^oC)
0 to 70
-20 to 85
TX Power
(dBm)
5 to 0
5 to 0
RX Sens. RoHS
(dBm) Cpmpliant
-24
Yes
-24
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
-20
0
GND
0
Max
85
70
85
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
TRSL-7380CG
TRSL-7380ACG
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Operating Temperature
Vcc
3.13
3.3
3.47
V
Topr
0
70
o_{C / TRSL-7380CG}
-20
85
o_{C / TRSL-7380ACG}
air flow 1m/sec
Data Rate
1000
1250
Mb/s
Power Supply Current
Icc
200
280
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V2.0