TRSL-7350W Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 1.25 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER

Optoway
TRSL-7350W / TRSL-7350AW
*******************************************************************************************************************************************************************************
TRSL-7350W / TRSL-7350AW
3.3V / 1550 nm / 1.25 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER
******************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l Compliant with IEEE 802.3z 1000BASE-XD
l Compliant with Fiber Channel 1X SM-LC-L FC-PI
l Small Form Factor, RJ-45 size, 2X10 pin Package
l 1550 nm DFB LD Transmitter
l 19 dB Power Budget at Least
l Analog Monitor Function
The TRSL-7350W series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
IEEE 802.3z Gigabit Ethernet 1000BASE-LX and Fiber
Channel 1X SM-LC-L FC-PI. This module is designed for
single mode fiber and operates at a nominal wavelength of
1550 nm. A guaranteed minimum optical link budget of 19
-- Transmitter Laser Bias Current
dB is offered which can correspond to a link distance of
-- Transmitter Laser Optical Power Monitor
over 50 km (assuming worst case fiber loss of 0.3 dB/km).
-- Receiver Photo Detector Current
The transmitter section uses a multiple quantum well
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70^oC Operation (TRSL-7350W)
l -20 to 85^oC Operation (TRSL-7350AW)
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
laser and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC. A LVPECL logic interface simplifies
interface to external circuitry.
LASER SAFETY
Compliant
This single mode transceiver is a Class 1 laser product. It
APPLICATIONS
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
l XDSL Applications
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate 1000
(Gb/s) BASE
TRSL-7350W
1.25/1.063 XD
TRSL-7350AW
1.25/1.063 XD
Distance
(km)
50
50
Wavelengt
h (nm)
1550 DFB
1550 DFB
Package
2X10 LC
2X10 LC
Temp.
(^oC)
0 to 70
-20 to 85
TX Power
(dBm)
0 to -5
0 to -5
RX Sens.
(dBm)
-24
-24
Signal
Detection
LVTTL
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
-20
0
GND
0
Max
85
70
85
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
TRSL-7350W
TRSL-7350AW
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Power Supply Current
Icc
Min
3.135
0
-20
1000
Typ
3.3
1250
200
Max
3.465
70
85
300
Units / Notes
V
o_{C / TRSL-7350W}
o_{C / TRSL-7350AW}
Mb/s
mA
*******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 6/30/2004 V2.0