TRSL-73160G Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 160 km / 1550 nm / 1.25 Gbps SFF LC SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-73160CG
***********************************************************************************************************************************************************************
TRSL-73160CG / TRSL-73160G
(RoHS Compliant)
3.3V / 160 km / 1550 nm / 1.25 Gbps SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
The TRSL-73160CG series single mode transceivers is
l IEEE 802.3z 1000BASE-ZX Compliant
small form factor, low power, high performance module for
l Fibre Channel 1X SM-LC-L FC-PI Compliant
bi-directional serial optical data communications such as
l Small Form Factor, RJ-45 size, 2X5 pin Package
IEEE 802.3z Gigabit Ethernet 1000BASE-ZX and Fiber
l 1550 nm DFB LD Transmitter
Channel 1X SM-LC-L FC-PI. This module is designed for
l 36 dB Power Budget at Least
single mode fiber and operates at a nominal wavelength of
l Distance up to 160 km
1550 nm. A guaranteed minimum optical link budget of 36
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
dB is offered which can correspond to a link distance of
over 160 km (assuming worst case fiber loss of 0.2 dB/km).
l LVTTL Signal Detect Output :TRSL-73160CG
The transmitter section uses a multiple quantum well
l LVPECL Signal Detect Output :TRSL-73160G
DFB laser and is a class 1 laser compliant according to
l Single +3.3 V Power Supply
International Safety Standard IEC-60825. The receiver
l 0 to 70^oC Operating
section uses an integrated InGaAs detector preamplifier
l Wave Solderable and Aqueous Washable
(IDP) mounted in an optical header and a limiting
l Class 1 Laser International Safety Standard IEC-60825
post-amplifier IC. A LVPECL logic interface simplifies
Compliant
interface to external circuitry.
APPLICATIONS
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
l Metro Edge Switching
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate 1000
(Gb/s) BASE
TRSL-73160CG
1.25/1.063
Distance Wavelengt Package
(km)
h (nm)
160 1550 DFB 2X5 LC
Temp.
(^oC)
0 to 70
TX Power RX Sens. RoHS
(dBm) (dBm) Cpmpliant
5 to 2
-34
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Case Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
0
GND
0
Max
85
70
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
Air flow 1m/sec
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Power Supply Current
Icc
Min
3.13
0
1000
Typ
3.3
1250
200
Max
3.47
70
280
Units / Notes
V
o_{C / Air flow 1m/sec}
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 7/1/2008 V1.0