TRSL-7130W Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 1.25 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER

Optoway
TRSL-7130W / TRSL-7130AW
*******************************************************************************************************************************************************************************
TRSL-7130W / TRSL-7130AW
3.3V / 1310 nm / 1.25 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER
******************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l Compliant with IEEE 802.3z 1000BASE-LX
l Compliant with Fiber Channel 1X SM-LC-L FC-PI
l Small Form Factor, RJ-45 size, 2X10 pin Package
l 1310 nm LD Transmitter (TRSL-7130W)
l 1310 nm DFB LD Transmitter (TRSL-7130AW)
l 19 dB Link Power Budget at Least
l Analog Monitor Function
The TRSL-7130W series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
IEEE 802.3z Gigabit Ethernet 1000BASE-LX and Fiber
Channel 1X SM-LC-L FC-PI. This module is designed for
single mode fiber and operates at a nominal wavelength of
1310 nm. The transmitter section uses a multiple
quantum well laser and is a class 1 laser compliant
-- Transmitter Laser Bias Current
according to International Safety Standard IEC-60825. The
-- Transmitter Laser Optical Power Monitor
receiver section uses an integrated InGaAs detector
-- Receiver Photo Detector Current
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70^oC Operating: TRSL-7130W
l -20 to 85^oC Operating: TRSL-7130AW
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
APPLICATIONS
or with a dust plug.
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
ORDER INFORMATION
P/No.
Bit Rate 1000
(Gb/s) BASE
TRSL-7130W
1.25/1.063
TRSL-7130AW
1.25/1.063
Distance
(km)
30
30
Wavelengt
h (nm)
1310
1310 DFB
Package
2X10 LC
2X10 LC
Temp.
(^oC)
0 to 70
-20 to 85
TX Power
(dBm)
0 to -5
0 to -5
RX Sens.
(dBm)
-24
-24
Signal
Detection
LVTTL
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
0
GND
0
Max
85
70
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Power Supply Current
Icc
Min
3.135
0
1000
Typ
3.3
1250
200
Max
3.465
70
300
Units / Notes
V
o_C
Mb/s
mA
*******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 6/30/2004 V2.0