TRSL-7110W Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 1.25 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER

Optoway
TRSL-7110W / TRSL-7110AW
*******************************************************************************************************************************************************************************
TRSL-7110W / TRSL-7110AW
3.3V / 1310 nm / 1.25 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER
******************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l Compliant with IEEE 802.3z 1000BASE-LX
l Compliant with Fiber Channel 1X SM-LC-L FC-PI
l Small Form Factor, RJ-45 size, 2X10 pin Package
l 1310 nm LD Transmitter
l Analog Monitor Function
The TRSL-7110W series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
IEEE 802.3z Gigabit Ethernet 1000BASE-LX and Fiber
Channel 1X SM-LC-L FC-PI. This module is designed for
single mode fiber and operates at a nominal wavelength of
-- Transmitter Laser Bias Current
1310 nm. The transmitter section uses a multiple
-- Transmitter Laser Optical Power Monitor
quantum well laser and is a class 1 laser compliant
-- Receiver Photo Detector Current
according to International Safety Standard IEC-60825. The
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70^oC Operation (TRSL-7110W)
l -40 to 85^oC Operation (TRSL-7110AW)
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
APPLICATIONS
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate 1000
(Gb/s) BASE
TRSL-7110W
1.25/1.063 LX/LH
TRSL-7110AW
1.25/1.063 LX/LH
Distance
(km)
10
10
Wavelengt
h (nm)
1310
1310
Package
2X10 LC
2X10 LC
Temp.
(^oC)
0 to 70
-40 to 85
TX Power
(dBm)
-3 to -9.5
-3 to -9.5
RX Sens.
(dBm)
-20
-20
Signal
Detection
LVTTL
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
-40
0
GND
0
Max
85
70
85
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
TRSL-7110W
TRSL-7110AW
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Power Supply Current
Icc
Min
3.1
0
-40
1000
Typ
3.3
1250
200
Max
3.5
70
85
260
Units / Notes
V
o_{C / TRSL-7110W}
o_{C / TRSL-7110AW}
Mb/s
mA
*******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2004 V1.0