TRSL-7110CG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 1.25 Gbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-7110CG
***********************************************************************************************************************************************************************
TRSL-7110CG / TRSL-7110ACG / TRSL-7110G / TRSL-7110AG
3.3V / 1310 nm / 1.25 Gbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l IEEE 802.3z 1000BASE-LX Compliant
l Fiber Channel 1X SM-LC-L FC-PI Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1310 nm LD Transmitter
l 10 km Transmission at Least
The TRSL-7110CG series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
IEEE 802.3z Gigabit Ethernet 1000BASE-LX and Fiber
Channel 1X SM-LC-L FC-PI. This module is designed for
single mode fiber and operates at a nominal wavelength of
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detect Output: TRSL-7110CG
l LVPECL Signal Detection Output: TRSL-7110G
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation: TRSL-7110CG
l -40 to 85^oC Operation: TRSL-7110ACG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
1310 nm. The transmitter section uses a multiple
quantum well laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
Compliant
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
APPLICATIONS
specified temperature and voltage limits. The optical ports
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
l Metro Edge Switching
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate 1000
(Gb/s) BASE
TRSL-7110CG
1.25/1.063 LX/LH
TRSL-7110ACG
1.25/1.063 LX/LH
Distance
(km)
10
10
Wavelengt
h (nm)
1310
1310
Package
2X5 LC
2X5 LC
Temp.
(^oC)
0 to 70
-40 to 85
TX Power
(dBm)
-3 to -9.5
-3 to -9.5
RX Sens.
(dBm)
-20
-20
RoHS
Compliant
Yes
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Power Supply Current
Icc
Min
-40
0
-40
0
GND
0
Min
3.13
0
-40
1000
Max
85
70
85
260
4.5
Vcc
30
Typ
3.3
1250
200
Units
o_C
o_C
o_C
V
V
mA
Notes
TRSL-7110CG
TRSL-7110CAG
10 seconds on leads only
Max
3.47
70
85
250
Units / Notes
V
o_{C / TRSL-7110CG}
o_{C / TRSL-7110CAG}
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V2.0