TRSL-5380G Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 622 Mbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-5380G
***********************************************************************************************************************************************************************
TRSL-5380G / TRSL-5380AG / TRSL-5380CG / TRSL-5380ACG
3.3V / 1550 nm / 622 Mbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-12 LR-2 / SDH STM-4 (L-4.2) Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1550 nm DFB LD Transmitter
l 26 dB Link Power Budget at Least
l LVPECL Signal Input / Output
l LVTTL Transmitter Disable Input
l LVPECL Signal Detect Output: TRSL-5380G
l LVTTL Signal Detect Output: TRSL-5380CG
l Single +3.3 V Power Supply
l 0 to 70^oC Operating: TRSL-5380G
l -20 to 85^oC Operating : TRSL-5380AG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
The TRSL-5380G series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-12 LR-2 / SDH STM-4 (L-4.2) and Fiber
Channel. This module is designed for single mode fiber and
operates at a nominal wavelength of 1550 nm. A guaranteed
minimum optical link budget of 26 dB is offered which can
correspond to a link distance of over 80 km (assuming worst
case fiber loss of 0.25 dB/km). The transmitter section
uses a multiple quantum well 1550 nm DFB laser and is a
class 1 laser compliant according to International Safety
Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
Compliant
logic interface simplifies interface to external circuitry.
APPLICATIONS
l ATM 622 Mbps Links
l SONET/SDH Equipment Interconnect
l Fiber Channel 533 Mb/s Links
ORDER INFORMATION
P/No.
Bit Rate SONET
(Mb/s)
/SDH
TRSL-5380G
622 LR-2/L-4.2
TRSL-5380AG
622 LR-2/L-4.2
Distance
(km)
80
80
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
Wavelength
(nm)
1550 DFB
1550 DFB
Package
2X5 LC
2X5 LC
Temp. TX Power
(^oC)
(dBm)
0 to 70 2 to -3
-20 to 85 2 to -3
RX Sens.
(dBm)
-29
-29
RoHS
Compliant
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Tstg
-40
85
o_C
Operating Temperature
Topr
0
70
o_C
TRSL-5380G
-20
85
TRSL-5380AG/air flow 1m/sec
Soldering Temperature
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Vcc
0
4.5
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Vcc
3.13
3.3
3.47
V
Operating Temperature
Topr
0
70
o_{C / TRSL-5380G}
-20
85
o_{C / TRSL-5380AG/air flow 1m/sec}
Data Rate
50
622
Mb/s
Power Supply Current
Icc
200
300
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw
12/1/2005 V2.0