TRSL-5140WG Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 622 Mbps RoHS Compliant SFF LC 2X10 SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-5140WG
***********************************************************************************************************************************************************************
TRSL-5140WG / TRSL-5140AWG
3.3V / 1310 nm / 622 Mbps RoHS Compliant SFF LC 2X10 SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-12 LR-1 / SDH STM-4 (L-4.1) Compliant
l Small Form Factor, RJ-45 size, 2X10 pin Package
l 1310 nm LD Transmitter
l 25 dB Link Budget at Least
l Analog Monitor Function
The TRSL-5140WG series single mode transceivers is
small form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-12 LR-1 / SDH STM-4 (L-4.1) and Fast
Ethernet. This module is designed for single mode fiber and
operates at a nominal wavelength of 1310 nm. A guaranteed
-- Transmitter Laser Bias Current
minimum optical link budget of 25 dB is offered which can
-- Transmitter Laser Optical Power Monitor
-- Receiver Photo Detector Current
l LVPECL Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation: TRSL-5140WG
l -40 to 85^oC Operation: TRSL-5140WG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
correspond to a link distance of over 40 km (assuming worst
case fiber loss of 0.45 dB/km). The transmitter section
uses a 1310 nm multiple quantum well DFB laser and is a
class 1 laser compliant according to International Safety
Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
logic interface simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
APPLICATIONS
l ATM 622 Mbps Links
l SONET/SDH Equipment Interconnect
l Fiber Channel 533 Mb/s Links
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET
(Mb/s)
/SDH
TRSL-5140WG
622 LR-1/L-4.1
TRSL-5140AWG
622 LR-1/L-4.1
Distance
(km)
40
40
Wavelength
(nm)
1310
1310 DFB
Package
2X10 LC
2X10 LC
Temp.
(^oC)
0 to 70
-40 to 85
TX Power
(dBm)
2 to -3
2 to -3
RX Sens.
(dBm)
-28
-28
RoHS
Complaint
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Storage Temperature
Tstg
Operating Temperature
Topr
Soldering Temperature
---
Power Supply Voltage
Vcc
Input Voltage
---
Output Current
Iout
Min
-40
0
-20
0
GND
0
Max
85
70
85
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
TRSL-5140WG
TRSL-5140AWG/air flow 1m/sec
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Vcc
3.13
3.3
3.47
V
Operating Temperature
Topr
0
70
o_{C / TRSL-5140WG}
-20
85
o_{C / TRSL-5140AWG/air flow 1m/sec}
Data Rate
50
622
Mb/s
Power Supply Current
Icc
200
300
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw
12/1/2005 V2.0