TRSL-5120WG Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 622 Mbps RoHS Compliant SFF LC 2X10 SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-5120WG
***********************************************************************************************************************************************************************
TRSL-5120WG / TRSL-5120AWG / TRSL-5120CWG / TRSL-5120ACWG
3.3V / 1310 nm / 622 Mbps RoHS Compliant SFF LC 2X10 SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-12 IR-1 / SDH STM-4 (S-4.1) Compliant
l Small Form Factor, RJ-45 size, 2X10 pin Package
l 1310 nm LD Transmitter
l Analog Monitor Function
The TRSL-5120WG series single mode transceivers is
small form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-12 IR-1 / SDH STM-4 (S-4.1) and Fast
Ethernet. This module is designed for single mode fiber and
-- Transmitter Laser Bias Current
-- Transmitter Laser Optical Power Monitor
-- Receiver Photo Detector Current
l LVPECL Signal Input / Output
l LVTTL Transmitter Disable Input
l LVPECL Signal Detect Output: TRSL-5120WG
l LVTTL Signal Detect Output: TRSL-5120CWG
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation: TRSL-5120WG
l -40 to 85^oC Operation: TRSL-5120AWG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
operates at a nominal wavelength of 1310 nm. The
transmitter section uses a 1310 nm multiple quantum
well laser and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC. A PECL logic interface simplifies
interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
APPLICATIONS
or with a dust plug.
l ATM 622 Mbps Links
l SONET/SDH Equipment Interconnect
l Fibre Channel 533 Mb/s Links
ORDER INFORMATION
P/No.
Bit Rate SONET
(Mb/s)
/SDH
TRSL-5120WG
TRSL-5120AWG
622 IR-1/S-4.1
622 IR-1/S-4.1
Distance
(km)
20
20
Wavelength
(nm)
1310
1310
Package
2X10 LC
2X10 LC
Temp. TX Power
(^oC)
(dBm)
0 to 70 -8 to -14
-40 to 85 -8 to -14
RX Sens.
(dBm)
-28
-28
RoHS
Complaint
Yes
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Storage Temperature
Tstg
-40
Operating Temperature
Topr
0
Max
85
70
Units
o_C
o_C
Notes
TRSL-5120WG
Soldering Temperature
---
-40
85
TRSL-5120AWG/air flow 1m/sec
260
o_C
10 seconds on leads only
Power Supply Voltage
Vcc
0
4.5
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Vcc
3.13
3.3
3.47
V
Operating Temperature
Topr
0
70
o_{C / TRSL-5120W}
-40
85
o_{C / TRSL-5120AW/air flow 1m/sec}
Data Rate
50
622
Mb/s
Power Supply Current
Icc
280
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw
12/1/2005 V2.0