TRSL-5120G Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 622 Mbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-5120G
**********************************************************************************************************************************************************************
TRSL-5120G / TRSL-5120AG / TRSL-5120CG / TRSL-5120ACG
3.3V / 1310 nm / 622 Mbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER
*********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-12 IR-1 / SDH STM-4 (S-4.1) Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1310 nm LD Transmitter
l LVPECL Signal Input / Output
l LVTTL Transmitter Disable Input
l LVPECL Signal Detect Output: TRSL-5120G
l LVTTL Signal Detect Output: TRSL-5120CG
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating: TRSL-5120G
l -40 to 85^oC Operating: TRSL-5120AG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
The TRSL-5120G series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-12 IR-1 / SDH STM-4 (S-4.1) and Fiber
Channel. This module is designed for single mode fiber and
operates at a nominal wavelength of 1310 nm. The
transmitter section uses a multiple quantum well laser
and is a class 1 laser compliant according to International
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
logic interface simplifies interface to external circuitry.
LASER SAFETY
Compliant
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
APPLICATIONS
l ATM 622 Mbps Links
l SONET/SDH Equipment Interconnect
l Fiber Channel 533 Mb/s Links
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET
(Mb/s)
/SDH
TRSL-5120G
622 IR-1/S-4.1
TRSL-5120AG
622 IR-1/S-4.1
Distance
(km)
20
20
Wavelength
(nm)
1310
1310
Package
2X5 LC
2X5 LC
Temp. TX Power
(^oC)
(dBm)
0 to 70 -8 to -14
-40 to 85 -8 to -14
RX Sens.
(dBm)
-28
-28
RoHS
Compliant
Yes
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
-40
0
GND
0
Max
85
70
85
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
TRSL-5120G
TRSL-5120AG
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units / Notes
Power Supply Voltage
Operating Temperature
Vcc
3.13
3.3
3.47
V
Topr
0
70
o_{C / TRSL-5120G}
-40
85
o_{C / TRSL-5120AG}
Data Rate
50
622
Mb/s
Power Supply Current
Icc
180
240
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V2.0