TRSL-3380G Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 155 Mbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-3380G
***********************************************************************************************************************************************************************
TRSL-3380G / TRSL-3380AG
3.3V / 1550 nm / 155 Mbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-3 LR-2 / SDH STM-1 (L-1.2) Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1550 nm DFB LD Transmitter
l 29 dB Link Budget at Least
l Distance up to 80 km
l LVPECL Signal Input / Output
l LVTTL Transmitter Disable Input
l LVPECL Signal Detect Output
l Single +3.3 V Power Supply
The TRSL-3380G series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-3 LR-2 / SDH STM-1 (L-1.2) and Fast
Ethernet. This module is designed for single mode fiber and
operates at a nominal wavelength of 1550 nm. A guaranteed
minimum optical link budget of 29 dB is offered which can
correspond to a link distance of over 80 km (assuming worst
case fiber loss of 0.25 dB/km). The transmitter section
uses a multiple quantum well 1550 nm DFB laser and is a
l RoHS Compliant
l 0 to 70^oC Operating: TRSL-3380G
l -40 to 85^oC Operating: TRSL-3380AG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
class 1 laser compliant according to International Safety
Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
logic interface simplifies interface to external circuitry.
Compliant
LASER SAFETY
APPLICATIONS
This single mode transceiver is a Class 1 laser product. It
l ATM 155 Mbps Links
l SONET/SDH Equipment Interconnect
l Fast Ethernet 100 Mb/s Links
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SDH
(Mb/s) /SONET
TRSL-3380G
125 / 155 LR-2/L-1.2
TRSL-3380AG
125 / 155 LR-2/L-1.2
Distance
(km)
80
80
Wavelength
(nm)
1550 DFB
1550 DFB
Package
2X5 LC
2X5 LC
Temp.
(^oC)
0 to 70
-40 to 85
TX Power
(dBm)
0 to -5
0 to -5
RX Sens.
(dBm)
-34
-34
RoHS
Compliant
Yes
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
-40
0
GND
0
Max
85
70
85
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
TRSL-3380G
TRSL-3380AG
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Power Supply Current
Icc
Min
Typ
Max
Units / Notes
3.13
3.3
3.47
V
0
70
o_{C / TRSL-3380G}
-40
85
o_{C / TRSL-3380AG}
125 / 155
170
Mb/s
280
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw
12/1/2005 V2.0