TRSL-33100WG Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 155 Mbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER

Optoway
1
TRSL-33100WG
***********************************************************************************************************************************************************************
TRSL-33100WG
3.3V / 1550 nm / 155 Mbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l SONET OC-3 LR-2 / SDH STM-1 (L-1.2) Compliant
l Small Form Factor, RJ-45 size, 2X10 pin Package
l 1550 nm DFB LD Transmitter
l 31 dB Link Power Budget at Least
l Distance up to 100 km
l Analog Monitor Function
The TRSL-33100WG series single mode transceivers is
small form factor, low power, high performance module for
bi-directional serial optical data communications such as
SONET OC-3 LR-2 / SDH STM-1 (L-1.2) and Fast
Ethernet. This module is designed for single mode fiber and
operates at a nominal wavelength of 1550 nm. A guaranteed
minimum optical link budget of 31 dB is offered which can
-- Transmitter Laser Bias Current
correspond to a link distance of over 100 km (assuming
-- Transmitter Laser Optical Power Monitor
worst case fiber loss of 0.25 dB/km). The transmitter
-- Receiver Photo Detector Current
l LVPECL Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70^oC Operating
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
section uses a multiple quantum well laser and is a class 1
laser compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry.
LASER SAFETY
Compliant
This single mode transceiver is a Class 1 laser product. It
APPLICATIONS
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
l ATM 155 Mbps Links
l SONET/SDH Equipment Interconnect
l Fast Ethernet 100 Mb/s Links
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SDH
(Mb/s) /SONET
TRSL-33100WG
125 / 155
Distance Wavelength Package
(km)
(nm)
100 1550 DFB 2X10 LC
Temp. TX Power RX Sens. RoHS
(^oC)
(dBm)
(dBm) Compliant
0 to 70 2 to -3
-34
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
0
GND
0
Max
85
70
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
With air flow 1m/sec
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Power Supply Current
Icc
Min
Typ
Max
3.13
3.3
3.47
0
70
125 / 155
200
200
280
Units / Notes
V
o_{C / air flow 1m/sec}
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V2.0