TRS-9115G Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 2.5 Gbps RoHS Compliant Optical Single-Mode Transceiver

Optoway
1
TRS-9115CG
**********************************************************************************************************************************************************************
TRS-9115CG / TRS-9115CTG / TRS-9115CFG
3.3V / 1310 nm / 2.5 Gbps RoHS Compliant Optical Single-Mode Transceiver
*********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC Single Mode Transceiver: TRS-9115CG
l Duplex ST Single Mode Transceiver: TRS-9115CTG
l Duplex FC Single Mode Transceiver: TRS-9115CFG
l SONET OC-48 IR-1/ SDH STM-16 (S-16.1) Compliant
l Fiber Channel 2X/1X SM-LC-L FC-PI Compliant
l IEEE 802.3z Gigabit Ethernet 1000BASE-LX
The TRS-9115CG series single mode transceivers is low
power, high performance module for bi-directional serial
optical data communications such as SONET OC-48 IR-1 /
SDH STM-16 (S-16.1), Gigabit Ethernet and 1X/2X Fiber
channel. This module is designed for single mode fiber and
operates at a nominal wavelength of 1310 nm. The
Compliant
l 1310 nm DFB LD Transmitter
l Industry Standard 1 x 9 Footprint
l 0 to 70^oC Operating
l Single +3.3 V Power Supply
l RoHS Compliant
l TTL Signal Detect Output
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
transmitter section uses a multiple quantum well laser
and is a class 1 laser compliant according to International
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A
LVPECL logic interface simplifies interface to external
circuitry.
LASER SAFETY
Compliant
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
l High Performance Desktops
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET Distance Wavelength Voltage
(Mb/s) /SDH
(km)
(nm)
(V)
Package
Temp.
(^oC)
TRS-9115CG 2488 IR-1/S-16.1 15 1310 DFB 3.3 1X9 SC/ST/FC 0 to 70
TX
Power
(dBm)
0 to -5
RX Sens. RoHS
(dBm) Compliant
-18
Y
Note: TRS-XXXXXFG for FC duplex transceiver, TRS-XXXXXTG for ST duplex transceiver, TRS-XXXXX-EMG for SC duplex
transceiver with extended EMI shielding,
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Notes
Storage Temperature
Operating Temperature
Soldering Temperature
Tstg
-40
85
o_C
Topr
0
70
o_C
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Vcc
0
4.5
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Power Supply Voltage
Vcc
3.13
3.3
3.47
Operating Temperature
Topr
0
70
Data Rate
622
2488
2670
Power Supply Current
Icc
180
250
Units
V
o_C
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2006 V1.0