TRS-7380G Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver

Optoway
TRS-7380G
***********************************************************************************************************************************************************************
TRS-7380G / TRS-7380CG / TRS-7380TG / TRS-7380TCG / TRS-7380FG / TRS-7380FCG
3.3V / 1550 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC Single Mode Transceiver: TRS-7380G
l Duplex ST Single Mode Transceiver: TRS-7380TG
l Duplex FC Single Mode Transceiver: TRS-7380FG
l Compliant with IEEE-802.3z Gigabit Ethernet
l 1550 nm DFB LD Transmitter
l 22 dB Power Budget At Least
l 0 to 70^oC Operating: TRS-7380G
l -20 to 85^oC Operating: TRS-7380AG
l Industry Standard 1 x 9 Footprint
l Single +3.3V Power Supply
l RoHS Compliant
l LVPECL Signal Detect Output: TRS-7380G
l LVTTL Signal Detect Output: TRS-7380CG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 825
Compliant
The TRS-7380 series single mode transceivers is low power,
high performance module for bi-directional serial optical
data communications such Gigabit Ethernet and Fibre
Channel. This module is designed for single mode fiber and
operates at a nominal wavelength of 1550 nm. A guaranteed
minimum optical link budget of 22 dB is offered which can
correspond to a link distance of over 80 km (assuming worst
case fiber loss of 0.25 dB/km). The transmitter section uses
a multiple quantum well laser and is a class 1 laser
compliant according to International Safety Standard
IEC-825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
l High Performance Desktops
complies with IEC 825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate 1000 Distance Wavelength Voltage
(Mb/s) BASE (km)
(nm)
(V)
Package
Temp.
(^oC)
TRS-7380G
TRS-7380AG
1250 ZX
1250 ZX
80 1550 DFB 3.3 1X9 SC/ST/FC 0 to 70
80 1550 DFB 3.3 1X9 SC/ST/FC -20 to 85
TX
Power
(dBm)
3 to -2
3 to -2
RX Sens. RoHS
(dBm) Compliant
-24
Y
-24
Y
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Symbol
Min
Max
Units
Notes
Tstg
-40
85
o_C
Topr
0
70
o_C
TRS-7380G
-20
85
TRS-7380AG
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Vcc
0
4.5
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units
Power Supply Voltage
Operating Temperature
Vcc
3.1
3.3
3.5
V
Topr
0
70
o_{C / TRS-7380G}
-20
85
o_{C / TRS-7380AG}
Data Rate
1250
1300
Mb/s
Power Supply Current
Icc
200
280
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw
10/1/2005 V3.0