TRS-7120G Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver

Optoway
1
TRS-7120G
***********************************************************************************************************************************************************************
TRS-7120G / TRS-7120CG / TRS-7120TG / TRS-7120TCG / TRS-7120FG / TRS-7120FCG
3.3V / 1310 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver
**********************************************************************************************************************************************************************
FEATURES
l High Performance Desktops
l Duplex SC Single Mode Transceiver: TRS-7120G
DESCRIPTION
l Duplex ST Single Mode Transceiver: TRS-7120TG
The TRS-7120G series single mode transceivers is low
l Duplex FC Single Mode Transceiver: TRS-7120FG
power, high performance module for bi-directional serial
l Compliant with IEEE-802.3z Gigabit Ethernet
optical data communications such Gigabit Ethernet and
l Link Distance up to 20 km
Fibre Channel This module is designed for single mode
l Link Power Budget at Least 16 dB
fiber and operates at a nominal wavelength of 1310 nm. The
l Industry Standard 1 x 9 Footprint
transmitter section uses a multiple quantum well laser
l Single +3.3 V Power Supply
and is a class 1 laser compliant according to International
l RoHS Compliant
Safety Standard IEC-825. The receiver section uses an
l 0 to 70^oC Operating: TRS-7120G
integrated InGaAs detector preamplifier (IDP) mounted in
l -20 to 85^oC Operating:TRS-7120AG
an optical header and a limiting post-amplifier IC. A PECL
l LVPECL Signal Detect Output: TRS-7120G
logic interface simplifies interface to external circuitry.
l LVTTL Signal Detect Output: TRS-7120CG
l Wave Solderable and Aqueous Washable
LASER SAFETY
l Class 1 Laser International Safety Standard IEC 825
This single mode transceiver is a Class 1 laser product. It
Compliant
complies with IEC 825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate 1000
(Mb/s) BASE
TRS-7120G
1250
TRS-7120AG
1250
Distance Wavelength Voltage Package
(km)
(nm)
(V)
Temp.
(^oC)
20
1310
3.3 1X9 SC/ST/FC 0 to 70
20
1310
3.3 1X9 SC/ST/FC -20 to 85
TX
Power
(dBm)
-1 to -6
-1 to -6
RX Sens. RoHS
(dBm) Compliant
-22
Y
-22
Y
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Symbol
Min
Max
Units
Notes
Tstg
-40
85
o_C
Topr
0
70
o_C
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Vcc
0
4.5
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Power Supply Voltage
Vcc
3.1
3.3
3.5
Operating Temperature
Topr
0
70
Data Rate
1250
1300
Power Supply Current
Icc
240
Units
V
o_C
Mb/s
mA
************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw
10/1/2005 V4.0