TRS-7110G Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver

Optoway
1
TRS-7110G
***********************************************************************************************************************************************************************
TRS-7110G / TRS-7110CG / TRS-7110TG / TRS-7110TCG / TRS-7110FG / TRS-7110FCG
3.3V / 1310 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC Single Mode Transceiver: TRS-7110G
l Duplex ST Single Mode Transceiver: TRS-7110TG
l Duplex FC Single Mode Transceiver: TRS-7110FG
l Compliant with IEEE-802.3z Gigabit Ethernet
l Industry Standard 1 x 9 Footprint
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating: TRS-7110G
l -40 to 85^oC Operating:TRS-7110AG
l LVPECL Signal Detect Output: TRS-7110G
l LVTTL Signal Detect Output: TRS-7110CG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 825
The TRS-7110G series single mode transceivers is low
power, high performance module for bi-directional serial
optical data communications such Gigabit Ethernet and
Fibre Channel This module is designed for single mode
fiber and operates at a nominal wavelength of 1310 nm. The
transmitter section uses a multiple quantum well laser
and is a class 1 laser compliant according to International
Safety Standard IEC-825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
logic interface simplifies interface to external circuitry.
LASER SAFETY
Compliant
This single mode transceiver is a Class 1 laser product. It
complies with IEC 825 and FDA 21 CFR 1040.10 and
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
l High Performance Desktops
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate 1000 Distance Wavelength Voltage Package
(Mb/s) BASE (km)
(nm)
(V)
Temp. TX Power RX Sens. RoHS
(^oC) (dBm) (dBm) Compliant
TRS-7110G
1250 LX / LH 10
1310
3.3 1X9 SC/ST/FC 0 to 70 -3 to -9 -21
Y
TRS-7110AG
1250 LX / LH 10
1310
3.3 1X9 SC/ST/FC -40 to 85 -3 to -9 -21
Y
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Min
Max
Units
Notes
Tstg
-40
85
o_C
Topr
0
70
o_C
TRS-7110G
Soldering Temperature
-40
85
TRS-7110AG
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Vcc
0
4.5
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units
Power Supply Voltage
Operating Temperature
Vcc
3.1
3.3
3.5
V
Topr
0
70
o_{C / TRS-7110G}
-40
85
o_{C / TRS-7110AG}
Data Rate
1250
1300
Mb/s
Power Supply Current
Icc
240
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2005 V4.0