TRS-7030G Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 5V / 1310 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver

Optoway
1
TRS-7030G
***********************************************************************************************************************************************************************
TRS-7030G / TRS-7030TG / TRS-7030FG / TRS-7030CG / TRS-7030CTG / TRS-7030CFG
5V / 1310 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC Single Mode Transceiver: TRS-7030G
l Duplex ST Single Mode Transceiver: TRS-7030TG
l Duplex FC Single Mode Transceiver: TRS-7030FG
l Compliant with IEEE-802.3z Gigabit Ethernet
l Distance up to 30 km
l Link Power Budget at Least 19 dB
l Industry Standard 1 x 9 Footprint
l 0 to 70^oC Operating
l Single +5 V Power Supply
l RoHS Compliant
l PECL Signal Detect Output: TRS-7030G
l TTL Signal Detect Output: TRS-7030CG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
The TRS-7030G series single mode transceivers is low
power, high performance module for bi-directional serial
optical data communications such Gigabit Ethernet and
Fibre Channel. This module is designed for single mode
fiber and operates at a nominal wavelength of 1310 nm. The
transmitter section uses a multiple quantum well laser
and is a class 1 laser compliant according to International
Safety Standard IEC 60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
logic interface simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
l High Performance Desktops
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate 1000 Distance Wavelength Voltage
(Mb/s) BASE (km)
(nm)
(V)
Package
Temp.
(^oC)
TRS-7030G
1250
30
1310
5 1X9 SC/ST/FC 0 to 70
TX
Power
(dBm)
0 to -5
RX Sens. RoHS
(dBm) Compliant
-24
Y
Note: TRS-XXXXXF for FC duplex transceiver, TRS-XXXXXT for ST duplex transceiver, TRS-XXXXX-EM for SC duplex transceiver
with extended EMI shielding, TRS-XXXXXCX for transceiver with TTL signal detection output.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Symbol
Min
Max
Units
Notes
Tstg
-40
85
o_C
Topr
0
70
o_C
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Input Voltage
Vcc
0
6
V
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Power Supply Voltage
Vcc
4.75
5
5.25
Operating Temperature
Topr
0
70
Data Rate
1250
1300
Power Supply Current
Icc
270
Units
V
o_C
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2005 V3.0