TRS-7010G Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 5V / 1310 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver

Optoway
1
TRS-7010G
**********************************************************************************************************************************************************************
TRS-7010G / TRS-7010TG / TRS-7010FG / TRS-7010CG / TRS-7010CTG / TRS-7010CFG
5V / 1310 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver
*********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC Single Mode Transceiver: TRS-7010G
l Duplex ST Single Mode Transceiver: TRS-7010TG
l Duplex FC Single Mode Transceiver: TRS-7010FG
l Compliant with IEEE-802.3z Gigabit Ethernet
l Industry Standard 1 x 9 Footprint
l 0 to 70^oC Operating : TRS-7010G
l -40 to 85^oC Operating : TRS-7010AG
l Single +5 V Power Supply
l RoHS Compliant
l PECL Signal Detect Output: TRS-7010G
l TTL Signal Detect Output: TRS-7010CG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
The TRS-7010G series single mode transceivers is low
power, high performance module for bi-directional serial
optical data communications such Gigabit Ethernet and
Fibre Channel. This module is designed for single mode
fiber and operates at a nominal wavelength of 1310 nm. The
transmitter section uses a multiple quantum well laser
and is a class 1 laser compliant according to International
Safety Standard IEC 60825. The receiver section uses an
integrated InGaAs detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC. A PECL
logic interface simplifies interface to external circuitry.
LASER SAFETY
Compliant
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
l High Performance Desktops
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate 1000 Distance Wavelength Voltage
(Mb/s) BASE (km)
(nm)
(V)
Package
Temp.
(^oC)
TRS-7010G
TRS-7010AG
1250 LX / LH 10
1250 LX / LH 10
1310
1310
5 1X9 SC/ST/FC 0 to 70
5 1X9 SC/ST/FC -40 to 85
TX
Power
(dBm)
-3 to -9
-3 to -9
RX Sens. RoHS
(dBm) Compliant
-21
Y
-21
Y
Note: TRS-XXXXXFG for FC duplex transceiver, TRS-XXXXXTG for ST duplex transceiver, TRS-XXXXX-EMG for SC duplex
transceiver with extended EMI shielding, TRS-XXXXXCXG for transceiver with TTL signal detection output.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
-40
0
GND
0
Max
85
70
85
260
6
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
TRS-7010G
TRS-7010AG
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units
Power Supply Voltage
Operating Temperature
Vcc
4.75
5
5.25
V
Topr
0
70
o_{C / TRS-7010G}
-40
85
o_{C / TRS-7010AG}
Data Rate
1250
1300
Mb/s
Power Supply Current
Icc
180
240
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2005 V4.0