TRS-5280G Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 5V / 1550 nm / 622 Mbps RoHS Compliant Optical Single-Mode Transceiver

Optoway
1
TRS-5280G
***********************************************************************************************************************************************************************
TRS-5280G / TRS-5280TG / TRS-5280FG / TRS-5280CG / TRS-5280CTG / TRS-5280CFG
5V / 1550 nm / 622 Mbps RoHS Compliant Optical Single-Mode Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC Single Mode Transceiver: TRS-5280G
l Duplex ST Single Mode Transceiver: TRS-5280TG
l Duplex FC Single Mode Transceiver: TRS-5280FG
l Long-Reach SONET OC-3 / SDH STM-4 (L-4.2)
The TRS-5280G series single mode transceivers is low
power, high performance module for bi-directional serial
optical data communications such as SONET OC-12 / SDH
STM-4. This module is designed for single mode fiber and
Compliant
l 1550 nm DFB LD Transmitter
l Industry Standard 1 x 9 Footprint
l Single +5 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operatring: TRS-5280G
l -20 to 85^oC Operatring: TRS-5280AG
l PECL Signal Detection Output: TRS-5280G
l TTL Signal Detection Output: TRS-5280CG
l LED Multisourced 1 x 9 Transceiver Interchangeable
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
operates at a nominal wavelength of 1550 nm. The
transmitter section uses a multiple quantum well 1550
nm DFB laser and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC. A PECL logic interface simplifies
interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
APPLICATIONS
l ATM 622 Mbps Links
l SONET/SDH Equipment Interconnect
l Fiber Channel 532 Mbps Links
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET Distance Wavelength Voltage
(Mb/s) /SDH (km)
(nm)
(V)
Package
Temp.
(^oC)
TRS-5280G
TRS-5280AG
622 LR-2
622 LR-2
80 1550 DFB 5 1X9 SC/ST/FC 0 to 70
80 1550 DFB 5 1X9 SC/ST/FC -20 to 85
TX
Power
(dBm)
2 to -3
2 to -3
RX Sens. RoHS
(dBm) Compliant
-28
Yes
-28
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
-20
0
GND
0
Max
85
70
85
260
6
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
TRS-5280G
TRS-5280AG
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units
Power Supply Voltage
Operating Temperature
Vcc
4.75
5
5.25
V
Topr
0
70
o_{C / TRS-5280G}
-20
85
o_{C / TRS-5280AG}
Data Rate
50
622
Mb/s
Power Supply Current
Icc
260
mA
************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2006 V1.0