TRS-5120G Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 622 Mbps RoHS Compliant Optical Single-Mode Transceiver

Optoway
1
TRS-5120G
***********************************************************************************************************************************************************************
TRS-5120G / TRS-5120TG / TRS-5120FG / TRS-5120CG / TRS-5120CTG / TRS-5120CFG
3.3V / 1310 nm / 622 Mbps RoHS Compliant Optical Single-Mode Transceiver
*********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC Single Mode Transceiver: TRS-5120G
l Duplex ST Single Mode Transceiver: TRS-5120TG
l Duplex FC Single Mode Transceiver: TRS-5120FG
l Compliant with SONET OC-12 IR-1 / SDH STM-4
The TRS-5120G series single mode transceivers is low
power, high performance module for bi-directional serial
optical data communications such as SONET OC-12 IR-1 /
SDH STM-4 (S-4.1). This module is designed for single
(S-4.1)
l Industry Standard 1 x 9 Footprint
l Single +3.3 V Power Supply
l RoHS Compliant
l PECL Signal Detection Output: TRS-5120G
l TTL Signal Detection Output: TRS-5120CG
l 0 to 70^oC Operation: TRS-5120G
l -40 to 85^oC Operation: TRS-5120AG
l LED Multisourced 1 x 9 Transceiver Interchangeable
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
mode fiber and operates at a nominal wavelength of 1310
nm. The transmitter section uses a multiple quantum well
laser and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC. A PECL logic interface simplifies
interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
APPLICATIONS
l ATM 622 Mbps Links
l SONET/SDH Equipment Interconnect
l Fibre Channel 532 Mbps Links
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET Distance Wavelength Voltage Package
(Mb/s) /SDH (km)
(nm)
(V)
Temp.
(^oC)
TRS-5120G
TRS-5120AG
622 IR-1 / S-4.1 20
622 IR-1/S-4.1 20
1310
3.3 1X9 SC/ST/FC 0 to 70
1310
3.3 1X9 SC/ST/FC -40 to 85
TX Power
(dBm)
-8 to -14
-8 to -14
RX Sens. RoHS
(dBm) Compliant
-28
Y
-28
Y
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Min
Max
Units
Notes
Tstg
-40
85
o_C
Topr
0
70
o_C
TRS-5120G
Soldering Temperature
-40
85
TRS-5120AG
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Vcc
0
4.5
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units
Power Supply Voltage
Operating Temperature
Vcc
3.1
3.3
3.5
V
Topr
0
70
o_{C / TRS-5120G}
-40
85
o_{C / TRS-5120AG}
Data Rate
50
622
Mb/s
Power Supply Current
Icc
240
mA
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2005 V2.0