TRS-33200G Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 1550 nm / 155 Mbps RoHS Compliant Optical Single-Mode Transceiver

Optoway
1
TRS-33200G
***********************************************************************************************************************************************************************
TRS-33200G
3.3V / 1550 nm / 155 Mbps RoHS Compliant Optical Single-Mode Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC Single Mode Transceiver
l Long-Reach SONET OC-3 / SDH STM-1 Compliant
l 1550 nm DFB LD Transmitter
l High Sensitivity APD Receiver
l Power Budget at Lease 47 dB
l Distance up to 200 km
l Industry Standard 1 x 9 Footprint
l Single +3.3 V Power Supply
l RoHS Compliant
l PECL Signal Detection Output
l LED Multisourced 1 x 9 Transceiver Interchangeable
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
The TRS-33200G series single mode transceivers is low
power, high performance module for bi-directional serial
optical data communications such as SONET OC-3 / SDH
STM-1 and Fast Ethernet. This module is designed for
single mode fiber and operates at a nominal wavelength of
1550 nm. A guaranteed minimum optical link budget of 47
dB is offered which can correspond to a link distance of
over 200 km (assuming worst case fiber loss of 0.22
dB/km). The transmitter section uses a multiple quantum
well 1550 nm DFB laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated InGaAs avalanche
detector preamplifier mounted in an optical header and a
Compliant
limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry.
APPLICATIONS
l ATM 155 Mbps Links
l SONET/SDH Equipment Interconnect
l Fast Ethernet 100 Mb/s Links
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET Distance Wavelength Voltage
(Mb/s) /SDH (km)
(nm)
(V)
Package
TRS-33200G 125/155 ELR
200 1550 DFB 3.3
1X9 SC
Temp.
(^oC)
0 to 70
TX
Power
(dBm)
5 to 2
RX Sens. RoHS
(dBm) Compliant
-45
Y
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Symbol
Min
Max
Units
Notes
Tstg
-40
85
o_C
Topr
0
70
o_C
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Vcc
0
4.5
V
Input Voltage
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Power Supply Voltage
Vcc
3.13
3.3
3.47
Operating Temperature
Topr
0
70
Data Rate
Power Supply Current
Icc
155
260
Units
V
o_C
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2005 V2.0