TRS-3180G Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 155 Mbps RoHS Compliant Optical Single-Mode Transceiver

Optoway
1
TRS-3180G
***********************************************************************************************************************************************************************
TRS-3180G / TRS-3180TG / TRS-3180FG
3.3V / 1310 nm / 155 Mbps RoHS Compliant Optical Single-Mode Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC Single Mode Transceiver: TRS-3180G
l Duplex ST Single Mode Transceiver: TRS-3180TG
l Duplex FC Single Mode Transceiver: TRS-3180FG
l Long-Reach SONET OC-3 / SDH STM-1 (L-1.1)
The TRS-3180G series single mode transceivers is low
power, high performance module for bi-directional serial
optical data communications such as SONET OC-3 / SDH
STM-1 (L-1.1) and Fast Ethernet. This module is designed
Compliant
for single mode fiber and operates at a nominal wavelength
l Industry Standard 1 x 9 Footprint
l Single +3.3 V Power Supply
of 1310 nm. The transmitter section uses a multiple
quantum well laser and is a class 1 laser compliant
l RoHS Compliant
according to International Safety Standard IEC-825. The
l 0 to 70 ^oC Operation
l PECL Signal Detection Output
l LED Multisourced 1 x 9 Transceiver Interchangeable
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 825
Compliant
receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
APPLICATIONS
l ATM 155 Mbps Links
l SONET/SDH Equipment Interconnect
l Fast Ethernet 100 Mb/s Links
complies with IEC 825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET Distance Wavelength Voltage
(Mb/s) /SDH (km)
(nm)
(V)
Package
Temp.
(^oC)
TRS-3180G
155
80
1310
3.3 1X9 SC/ST/FC 0 to 70
TX
Power
(dBm)
5 to 0
RX Sens. RoHS
(dBm) Compliant
-36
Y
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Symbol
Min
Max
Units
Notes
Tstg
-40
85
o_C
Topr
0
70
o_C
---
260
o_C
10 seconds on leads only
Power Supply Voltage
Input Voltage
Vcc
0
4.5
V
---
GND
Vcc
V
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Power Supply Voltage
Vcc
3.1
3.3
3.5
Operating Temperature
Topr
0
70
Data Rate
155
Power Supply Current
Icc
240
Units
V
o_C
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2005 V2.0