TRS-3130G Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1310 nm / 155 Mbps RoHS Compliant Optical Single-Mode Transceiver

Optoway
1
TRS-3130G
***********************************************************************************************************************************************************************
TRS-3130G / TRS-3130TG / TRS-3130FG / TRS-3130AG / TRS-3130ATG / TRS-3130AFG
3.3V / 1310 nm / 155 Mbps RoHS Compliant Optical Single-Mode Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC Single Mode Transceiver: TRS-3130G
l Duplex ST Single Mode Transceiver:TRS-3130TG
l Duplex FC Single Mode Transceiver:TRS-3130FG
l Intermediate-Reach SONET OC-3 / SDH STM-1 (S-1.1)
The TRS-3130G series single mode transceivers is low
power, high performance module for bi-directional serial
optical data communications such as SONET OC-3 / SDH
STM-1 (S-1.1) and Fast Ethernet. This module is designed
Compliant
l Industry Standard 1 x 9 Footprint
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70 ^oC Operating: TRS-3130G
l -40 to 85 ^oC Operating: TRS-3130AG
l PECL Signal Detection Output
l LED Multisourced 1 x 9 Transceiver Interchangeable
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 825
for single mode fiber and operates at a nominal wavelength
of 1310 nm. The transmitter section uses a multiple
quantum well laser and is a class 1 laser compliant
according to International Safety Standard IEC 825. The
receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC. A PECL logic interface
simplifies interface to external circuitry.
LASER SAFETY
Compliant
This single mode transceiver is a Class 1 laser product. It
complies with IEC 825 and FDA 21 CFR 1040.10 and
APPLICATIONS
l ATM 155 Mbps Links
l SONET/SDH Equipment Interconnect
l Fast Ethernet 100 Mb/s Links
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET Distance Wavelength Voltage
(Mb/s) /SDH (km)
(nm)
(V)
TRS-3130G
TRS-3130AG
155 IR-1/S-1.1 30
155 IR-1/S-1.1 30
1310
3.3
1310
3.3
Package
1X9 SC/ST/FC
1X9 SC/ST/FC
Temp.
(^oC)
0 to 70
-40 to 85
TX
Power
(dBm)
-8 to -15
-8 to -15
RX Sens.
(dBm)
-34
-34
RoHS
Compliant
Y
Y
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
-40
0
GND
0
Max
85
70
85
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
TRS-3130G
TRS-3130AG
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units
Power Supply Voltage
Operating Temperature
Vcc
3.1
3.3
3.5
V
Topr
0
70
o_{C / TRS-3130G}
-40
85
o_{C / TRS-3130AG}
Data Rate
155
Mb/s
Power Supply Current
Icc
240
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 10/1/2005 V2.0