TRML-9100AG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 850 nm / 2.5 Gbps RoHS Compliant SFF LC MULTI-MODE TRANSCEIVER

Optoway
1
TRML-9100G
***********************************************************************************************************************************************************************
TRML-9100G / TRML-9100AG
3.3V / 850 nm / 2.5 Gbps RoHS Compliant SFF LC MULTI-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Multi-Mode Transceiver
l Compliant with Fibre Channel FC-PH-2 for
The TRML-9100G series multi-mode transceivers is small
form factor, low power, high performance module for
200-M5-SN-1 and 200-M6-SN-1
l Compliant with IEEE 802.3z 1000BASE-SX
bi-directional serial optical data communications such as
SONET/SDH, Fibre Channel 2x/1x and Gigabit Ethernet
l Link Distance at 2.5 Gbd
1000BASE-SX. This module is designed for multi-mode
150 m links with 62.5/125 µm MMF Cables
fiber and operates at a nominal wavelength of 850 nm. The
300 m links with 50/125 µm MMF Cables
l Link Distance at 1.25 Gbd
transmitter section uses a multiple quantum well 850 nm
VCSEL and is a class 1 laser compliant according to
300 m links with 62.5/125 µm MMF Cables
International Safety Standard IEC-60825. The receiver
500 m links with 50/125 µm MMF Cables
l Small Form Factor, RJ-45 size, 2X5 pin Package
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating: TRML-9100G
l -20 to 85^oC Operating: TRML-9100AG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
section uses an integrated GaAs detector preamplifier (IDP)
mounted in an optical header and a limiting post-amplifier
IC. A PECL logic interface simplifies interface to external
circuitry.
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
Compliant
or with a dust plug.
APPLICATIONS
l SONET/SDH Equipment Interconnect
l Gigabit Ethernet 1.25 Gb/s Links
ORDER INFORMATION
P/No.
Bit Rate SONET Distance Wavelength Package
(Gb/s) /SDH
(m)
(nm)
Temp. TX Power
(^oC)
(dBm)
TRML-9100G
2.5
150/300* 850
2X5 LC
0 to 70 -4 to -9
TRML-9100AG
2.5
150/300* 850
2X5 LC -20 to 85 -4 to -9
Note: 150 m links with 62.5/125 µm MMF Cables and 300 m links with 62.5/125 µm MMF Cables.
RX Sens.
(dBm)
-15
-15
RoHS
Compliant
Yes
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Symbol
Tstg
Topr
---
Vcc
---
Min
-40
0
-20
0
GND
Max
85
70
85
260
4.5
Vcc
Units
o_C
o_C
o_C
V
V
Notes
TRML-9100G
TRML-9100AG
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Power Supply Current
Icc
Min
3.13
0
-20
1000
Typ
3.3
2125 / 2500
180
Max
3.47
70
85
2700
240
Units / Notes
V
o_{C / TRML-9100G}
o_{C / TRML-9100AG}
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V2.0