TRML-8100BWG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 850 nm / 4.25 Gbps Digital Diagnostic SFF LC MULTI-MODE TRANSCEIVER

Optoway
1
TRML-8100WG
***********************************************************************************************************************************************************************
TRML-8100WG / TRML-8100BWG
(RoHS Compliant)
3.3V / 850 nm / 4.25 Gbps Digital Diagnostic SFF LC MULTI-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 4.25 Gb/s Bi-directional Data Link
l Duplex LC Multi-Mode Transceiver
l Compliant with Fibre Channel FC-PH-2 for
The TRML-8100WG series multi-mode transceivers is
small form factor, low power, high performance module for
bi-directional serial optical data communications such as
400-M5-SN-1 and 400-M6-SN-1
Fibre Channel 4x/2x/1x and Gigabit Ethernet
l Compliant with IEEE 802.3z 1000BASE-SX
l Link Distance at 4.25 Gbd
1000BASE-SX. This 2×7 pin SFF transceiver comply with
the 2×5 standard package defined by the SFF MSA with the
150 m links with 50/125 µm MMF Cables
exception of four extra pins for real-time digital diagnostics
70 m links with 62.5/125 µm MMF Cables
l Link Distance at 2.125 Gbd
and transmitter fault indication. Digital diagnostic functions
are available via the 2-wire serial interface defined in the
300 m links with 50/125 µm MMF Cables
SFF-8472 MSA. This module is designed for multi-mode
150 m links with 62.5/125 µm MMF Cables
l Link Distance at 1.063 Gbd
fiber and operates at a nominal wavelength of 850 nm. The
transmitter section uses a multiple quantum well 850 nm
500 m links with 50/125 µm MMF Cables
VCSEL and is a class 1 laser compliant according to
300 m links with 62.5/125 µm MMF Cables
l Small Form Factor, RJ-45 size, 2X5 pin Package
International Safety Standard IEC-60825. The receiver
section uses an integrated GaAs detector preamplifier (IDP)
l SFF-8472 Digital Diagnostic Function
mounted in an optical header and a limiting post-amplifier
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detect Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operating: TRML-8100G
l -10 to 85^oC Operating: TRML-8100BG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
IC. A PECL logic interface simplifies interface to external
circuitry.
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
Compliant
or with a dust plug.
APPLICATIONS
l Tri-Rate 4.25/2.125/1.063 Gb/s Fiber Channel
l 1.25 Gb/s 1000BASE-SX Ethernet
ORDER INFORMATION
P/No.
Bit Rate FC
(Gb/s)
Distance Wavelength
(m)
(nm)
TRML-8100WG 4 / 2 / 1 400/200/100 150/300/500 850
TRML-8100BWG 4 / 2 / 1 400/200/100 150/300/500 850
Package
2X7 LC with DMI
2X7 LC with DMI
Temp. TX Power RX Sens. _RoHS
(^oC)
(dBm) (dBm) _Compliant
0 to 70 -2.5 to -9 -15/-17/-18 Yes
-10 to 85 -2.5to -9 -15/-17/-18 Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Symbol
Tstg
Topr
---
Vcc
---
Min
-40
0
-10
0
GND
Max
85
70
85
260
4.5
Vcc
Units
o_C
o_C
o_C
V
V
Notes
TRML-8100WG
TRML-8100BWG
10 seconds on leads only
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 4/1/2007 V1.0