TRML-7100CG Datasheet, PDF (1/4 Pages) Optoway Technology Inc – 3.3V / 850 nm / 1.25 Gbps RoHS Compliant SFF LC MULTI-MODE TRANSCEIVER

Optoway
1
TRML-7100CG
***********************************************************************************************************************************************************************
TRML-7100CG / TRML-7100ACG
3.3V / 850 nm / 1.25 Gbps RoHS Compliant SFF LC MULTI-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Multi-Mode Transceiver
l Compliant with IEEE 802.3z 1000BASE-SX
l Compliant with Fibre Channel FC-PH-2 for
The TRML-7100CG series multi-mode transceivers is
small form factor, low power, high performance module for
bi-directional serial optical data communications such as
100-M5-SN-1 and 100-M6-SN-1
l 300 m links with 62.5/125 µm MMF Cables
l 500 m links with 50/125 µm MMF Cables
l Small Form Factor 2X5 pin Package
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detect Output
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation : TRML-7100CG
l -20 to 85^oC Operation : TRML-7100ACG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Gigabit Ethernet IEEE 802.3z 1000BASE-SX and Fiber
Channel FC-PH-2. This module is designed for multi-mode
fiber and operates at a nominal wavelength of 850 nm. The
transmitter section uses a multiple quantum well 850 nm
VCSEL and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated GaAs detector preamplifier (IDP)
mounted in an optical header and a limiting post-amplifier
IC. A PECL logic interface simplifies interface to external
circuitry.
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
Compliant
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
APPLICATIONS
l SONET/SDH Equipment Interconnect
l Gigabit Ethernet 1.25 Gb/s Links
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate 1000 Distance Wavelength Package
(Gb/s) BASE
(m)
(nm)
Temp. TX Power
(^oC)
(dBm)
TRML-7100CG 1.25/1.063 SX 300/500* 850
2X5 LC
0 to 70 -4 to -9
TRML-7100ACG 1.25/1.063 SX 300/500* 850
2X5 LC -20 to 85 -4 to -9
Note: 300 m links with 62.5/125 µm MMF Cables and 500 m links with 62.5/125 µm MMF Cables.
RX Sens.
(dBm)
-17
-17
RoHS
Compliant
Yes
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Output Current
Symbol
Tstg
Topr
---
Vcc
---
Iout
Min
-40
0
-20
0
GND
0
Max
85
70
85
260
4.5
Vcc
30
Units
o_C
o_C
o_C
V
V
mA
Notes
TRML-7100CG
TRML-7100ACG
10 seconds on leads only
Recommended Operating Conditions
Parameter
Symbol
Power Supply Voltage
Vcc
Operating Temperature
Topr
Data Rate
Power Supply Current
Icc
Min
3.13
0
-20
1000
Typ
3.3
1250
180
Max
3.47
70
85
250
Units / Notes
V
o_{C / TRML-7100CG}
o_{C / TRML-7100ACG}
Mb/s
mA
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 12/1/2005 V2.0