SPS-93160MG Datasheet, PDF (1/5 Pages) Optoway Technology Inc – 3.3V / 1550 nm / Multirate SFP LC SINGLE-MODE TRANSCEIVER

Optoway
1
SPS-93160MG
***********************************************************************************************************************************************************************
SPS-93160MG
(RoHS Compliant)
3.3V / 1550 nm / Multirate SFP LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with SONET OC-48 (LR-2) / SDH STM-16
The SPS-93160MG series single mode transceivers is small
form factor pluggable module for bi-directional serial
optical data communications such as SONET OC-48 / SDH
(L-16.2)
l Compliant with Fibre Channel 1x/2x SM-LC-L FC-PI
l Compliant with IEEE 802.3z 1000BASE-ZX
l 1550 nm DFB LD Transmitter
l APD High Sensitivity Receiver
l 35 dB Power Budget at Least
l Distance up to 160 km
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l 0 to 70^oC Operation
l Class 1 Laser International Safety Standard IEC-60825
STM-16, Gigabit Ethernet 1000BASE-LX and Fibre
Channel 1x/2x SM-LC-L FC-PI. It is with the SFP 20-pin
connector to allow hot plug capability. This module is
designed for single mode fiber and operates at a nominal
wavelength of 1550 nm. A guaranteed minimum optical
link budget of 35 dB is offered which can correspond to a
link distance of over 160 km (assuming worst case fiber loss
of 0.2 dB/km). The transmitter section uses a multiple
quantum well 1550 nm DFB laser and is a class 1 laser
compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated InGaAs
detector preamplifier (IDP) mounted in an optical header
Compliant
and a limiting post-amplifier IC.
APPLICATIONS
l SONET OC-48 / SDH STM-16
l SONET OC-12 / SDH STM-4
l SONET OC-3 / SDH STM-1
l Gigabit Ethernet / 1X/2X Fibre Channel
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate SONET Distance Wavelength Package
(Mb/s)
/SDH
(km)
(nm)
SPS-93160MG
Multirate*
160 1550 DFB LC SFP
Multirate*: 2.67 Gb/s / OC-48 / 2X FC / GbE / 1X FC / OC-12 / OC-3
Temp.
(^oC)
0 to 70
TX Power RX Sens. RoHS
(dBm) (dBm) Compliant
8 to 5
-30
Yes
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Units
Storage Temperature
Tstg
-40
85
o_C
Operating Case Temperature
Topr
0
70
o_C
Power Supply Voltage
Vcc
-0.5
3.6
V
Notes
Recommended Operating Conditions
Parameter
Symbol
Min
Power Supply Voltage
Vcc
3.13
Operating Case Temperature
Topr
0
Power Supply Current
Data Rate
I_{CC (TX+RX)}
125
Typ
3.3
230
2488
Max
3.47
70
300
2670
Units / Notes
V
o_C
mA
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: [phone]
Fax: [phone]
E-mail: [e-mail] http: // www.optoway.com.tw 1/1/2008 V1.0